1) superstructure
[英]['su:pəstrʌktʃə(r)] [美]['supɚ'strʌktʃɚ]
上覆构造
2) overburden structure
上覆层构造
1.
Analytical modeling of controlling factors for overburden structures in thick-skinned extensional salt tectonics;
厚皮拉伸盐构造运动中上覆层构造影响因素分析
3) drape structure
披覆构造
1.
The two major breakthroughs of oil and gas discoveries have resulted from the new knowledge about the large drape structures of Dongying formation on Liaoxi Rise; the source rocks of Shahejie and Dongying formations in Bozhong .
对辽西低凸起东营组大型披覆构造的新认识 ;对渤中凹陷沙河街组及东营组烃源岩、渤中及渤东地区盖层条件和新构造运动与油气成藏关系的新认识 ,带来渤海油气发现的两次重要突破。
4) nappe structure
推覆构造
1.
A discussion on nappe structure pattern in the jiu mountains and the south of the lower reaches of the changjiang river by the remote sensing image;
根据遥感影像讨论九岭──江南地区的推覆构造格局
2.
Latest Permian-earliest Triassic nappe structure in the Ulan Haya area on the northern margin of the North China platform;
华北地台北缘乌兰哈雅地区二叠纪末—三叠纪初推覆构造
3.
Discovery and significance of nappe structure in Yucheng area.
禹城地区推覆构造的发现及意义
5) gliding nappe
滑覆构造
1.
On the basis of analysing the structural features and the genetic mechanism of nappe, gliding nappe and fault-block structures in Linru Coalfield, Hexichen, Wenquan Street and the deep part of Chaochuan mining area are considered as the favourable districts for tracing coal.
在分析临汝煤田的推覆构造、滑覆构造及断块构造特征和成因机制的基础上,指出了河西陈、温泉街、朝川矿区深部等找煤的有利区段。
6) gliding nappe structure
滑覆构造
1.
Wangxia gliding nappe structure was formed with the forcing intrusion of Bawan-glin superunit granite in western Hainan.
琼西王下滑覆构造是由坝王岭超单元花岗岩的强力侵位而形成的。
2.
Not only are the extending structures well developed with- in the area,but the gliding nappe structures are found in Dongfangling.
地处阜平、赞皇两个变质核杂岩体之间的南坡庄——井陉地区,不但在广大地区发育伸展构造,而且在东方岭地区发育滑覆构造。
3.
Start with kneading effect of thrust nappe and gliding nappe structures to coal seams and plugging effect of thrusting compressional structure to coal seam gas,discussed control and impact of tectonics to gas distribution in No.
从推覆、滑覆构造对煤层的揉搓作用与逆冲挤压构造对煤层瓦斯的封闭作用入手,探讨该区域地质构造对二1煤层瓦斯分布的控制与影响。
补充资料：有机覆层:有机覆层
在基体材料表面覆以有机材料的材料保护层。在机械製造中﹐有机覆层的绝大部分是涂装层﹐或称油漆层。此外﹐也有用橡胶或塑料作为覆层的。需要抗酸﹑硷和抗腐蚀性气体和液体的钢铁件﹐常用厚约 3毫米的橡胶(如氯丁橡胶)或塑料(如氯化亚乙烯共聚物)黏在表面﹐可长期保护基体不受腐蚀。这种覆层主要用在大型抗蚀容器或排气系统中。埋在土壤中的金属构件﹐常以聚乙烯带包裹保护。在喷鉬或喷不锈钢的表面上涂覆聚四氟乙烯﹐在150℃温度下摩擦係数很低﹐磨损轻微﹐适於製造低载荷和要求高度清洁的滑动轴承﹐或用在食品﹑精细包装和纺织机械上。各国的Du﹑Dx轴承都是以塑料与金属复合製成的。通过静电喷涂将环氧树脂﹑氯化聚醚﹑聚四氟乙烯以及聚氯乙烯等塑料粉末涂覆在金属表面﹐可获多种抗化学腐蚀性极好的覆层﹐可用於输水﹑污水处理和海洋平台的设备上。有机覆层在辉光放电情况下﹐有机单体可以聚合成无针孔的有机膜﹐用作电容器的介质层。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条