1)  solidus
固液相曲线
2)  solid-liquid couping
固-液
3)  VLS method
气-固-液法
4)  Solid-Liquid Separation
固液分离
1.
Experimental Investigations on the Inorganic Ceramic Membranes in the Solid-Liquid Separation of Superfine Molecular Sieves;
无机陶瓷膜在超细分子筛固液分离上的实验研究
2.
Electro-flotation using in solid-liquid separation of activated sludge by orthogonal method;
电解浮选用于活性污泥固液分离的正交实验研究
3.
Study on solid-liquid separation of innovative integrated active sludge process;
一体化活性污泥新工艺固液分离效果实验研究
5)  solid-liquid coupling
固-液耦合
1.
In order to ensure the safety production under the condition of fully-mechanized caving in Dafoshi coal mine of Binchang mining area,we studied the mechanism of roof water inrush resulted from roof fall and simulated the mining process of the first coal mining face using the solid-liquid coupling material.
结合具体工程地质条件,利用固-液耦合相似材料模拟方法对首采工作面综放开采过程进行了研究,分析了裂隙带与冒落带导水通道分布特征,总结了含水层潜水渗流规律。
2.
A Solid-Liquid coupling mathematical model for permeating consolidation problems under finite deformations is built up, which reflects Solid-Liquid mutual coupling.
基于多相连续介质力学的理论,把土体抽象为叠合连续体,建立了有限变形下固-液耦合渗透固结问题的数学模型。
6)  solid-to-liquid ratio
固液比
1.
The effects of temperature, dialogite-to-sulfuric acid ratio, and solid-to-liquid ratio on leaching of dialogite by sulfuric acid were researched in the leaching experiment of ores from Hubei.
通过对湖北矿的浸取试验研究,讨论了温度、矿酸比、固液比对菱锰矿硫酸浸取的影响,优化了浸取条件,并确定温度对浸取的影响最为显著,使浸取率可以达到99。
2.
Solid-to-liquid ratio is introduced to estimate the solid-like of microstructure.
为揭示超薄膜的摩擦特性与微观结构的关系,运用分子动力学模拟的方法对其进行研究,采用固液比作为流体膜固化的定量描述,分别讨论温度、分子层数对固液比和摩擦力的影响。
7)  solid-liquid equilibrium
固液平衡
1.
Prediction of solid-liquid equilibrium to synthetic nitro-musk by using UNIFAC group-contribution method;
UNIFAC基团贡献法对合成硝基麝香固液平衡的研究
2.
The solid-liquid equilibrium data for the ternary mixture of o-dibromobenzene + m-dibromobenzene + p-dibromobenzene were determined by differential scanning calorimetry (DSC).
采用差示扫描量热法,通过对一系列“拟二元”物系固液平衡数据的测定,得到了邻二溴苯、间二溴苯和对二溴苯三元物系的固液平衡数据。
3.
Using the laser monitoring technique, the solid-liquid equilibrium data of succinic acid in cyclohexanol, cyclohexanone, N,N-dimethylformamid, N,N-dimethyllacetamide and acetic acid were measured by dynamic method.
采用激光监视技术由动态法测定了丁二酸在环己醇、环己酮、N,N-二甲基甲酰胺、N,N-二甲基乙酰胺和冰醋酸中的固液平衡数据,实验测定温度由室温至近353K,并分别用λh方程和NRTL方程对溶解度实验数据进行关联。
8)  solid-to-solution ratio
固/液比
1.
The influence of solid-to-solution ratio(SSR) on the sorption and desorption of dissolved petroleum hydrocarbons(DPH) to two surface soils(agricultural and black) was evaluated by batch reactor experiments.
采用批实验的方法,研究了2种土壤在不同的固/液比(solid-to-solution ratio,SSR)条件下对溶解性石油烃(DPH)的吸附-解吸特性。
9)  solid/liquid interface
固/液界面
1.
Adsorption mechanism of hyperdispersant on solid/liquid interface;
嵌段型超分散剂在固/液界面的吸附机理
2.
The shape of quenched solid/liquid interface in dendrite growth morphology appears as unevenness where some dendrite trunks grow as convex parts.
在枝晶固/液界面存在枝晶千的凸起,其平-凸-平-凸的程度随抽拉速率的增加呈现先加强后减弱最后几乎消失的规律。
10)  solid/liquid interface
固液界面
1.
Studies on nanobubbles formed at solid/liquid interface;
固液界面纳米气泡的研究
2.
ECSTM and its application in the study of solid/liquid interface;
电化学STM及对固液界面的研究
3.
The evolution of solid/liquid interface during single crystal superalloy growth by seeding technique was investigated.
研究了籽晶法生长单晶高温合金中固液界面的演变规律。
补充资料：固液分离
分子式：
CAS号：

性质：从水或废水中除去悬浮固体的过程。从废水中除去固体一般采用筛或沉淀方法。污泥处理中采用的分离方法有污泥重力浓缩、污泥的浮选或污泥的机械脱水。水处理中有微滤、澄清和深床过滤等方法。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条