1) stoplog dam
叠梁坝
2) needle dam
叠梁坝
3) laminated beam
叠梁
1.
Erection method of laminated beams of boiler structure;
锅炉构架叠梁的安装工艺
2.
In order to accurately analyze the differences on load carrying ability among laminated beam,laminated beam with wedges and beam as a whole of the same dimension,this paper sets up a model of flection of laminated beams with rectangular cross section by taking advantage of Winkle s foundation assumption method and electric testing technique.
为了精确分析叠梁、加楔块叠梁和整梁的承载能力,采用温克尔假设法和电测实验技术,完成了矩形截面叠梁受力弯曲时的模型简化理论计算与实测分析。
4) stoplogs gate
叠梁门
1.
Analysis on determining maximum amplitude of model fluctuation pressure on training stoplogs gate with varying elevation intake;
分层进水口导水叠梁门模型脉动压力最大幅值取值分析
5) simply supported laminated beam
简支叠梁
1.
A simple analytical model for simply supported laminated beams is established based on the characteristic of beams under stress.
针对简支叠梁的受力特点,建立简支叠梁的简化分析模型,对简支叠梁之间的接触力分布提出假设,运用变形协调条件推导出接触力函数,并对接触力函数的有效性进行了讨论。
6) folded beam
折叠梁
1.
The main advantages of the gyroscope are that the mechanically and electrically coupling between actuation mode and detection mode are reduced through independent folded beam and oscillator mass.
该陀螺的突出优点在于驱动和检测采用了相互独立的折叠梁和振动质量 ,故驱动和检测间的耦合大大地减小。
2.
In this article,a kind of 2 D capacitive silicon microaccelerometer with the folded beam is designed and its main axis stiffness is caculated using force method,which provides the basis for studying dynamic characteristics of this kind of microaccelerometer.
本文针对自主开发设计的一种带折叠梁的二维叉指电容式硅微加速度传感器 ,采用力法求解了其主轴刚度 ,为进一步研究该二维微加速度传感器的动态响应特性提供了理论依
7) training stoplog
导水叠梁
1.
training stoplog) will be set up at the upstream side of intake trash racks.
根据这一要求,在进水口拦污栅上游侧设置了一个特殊结构,即导水叠梁,通过改变导水叠梁高度,可以满足要求。
8) steel stoplog gate
钢叠梁门
9) training log
叠梁高程
1.
Numerical simulation of training log elevation influencing on DO distribution in discharged flow of Bakun hydropower station;
Bakun水电站叠梁高程对下泄水流溶解氧影响数值模拟
10) combined beam arch bridges
叠梁拱
1.
This article introduces the structure feature in single arch timber structure of combined beam arch bridges, analysis of the force capacity and the construct.
本文介绍单孔木结构叠梁拱的结构特点、受力分析和无支架的施工方法 ,以达到古为今用之目
补充资料:叠梁闸门
叠梁闸门
stop log gate
根插入门槽以封闭水道孔口的闸门,也称插板(见图)。制造叠梁闸门的材料有木材、钢材和钢筋混凝土等,目前多半用在中小型水工建筑物上作为检修闸门。叠梁闸门构造简单,制作方便,但接缝较多,漏水量较大,操作也较麻烦。20世纪70年代发展了一种浮式叠梁闸门,是四周密封的箱形梁,可利用浮力减少门重,在水面上利用挂钩梁操作,较为方便。(夏念凌)叠梁闸门d ieliang zhamen叠梁闸门(stop109 gate)由若干根独立的横梁逐
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条