1)  isothermal remanent magnetization
等温剩余磁化
2)  IRM
等温剩余磁化强度
3)  isothermal
等温
1.
Analysis of isothermal viscoelastic mechanical behavior in transversely isotropic soft packing for valve;
阀用软填料横向同性等温粘弹力学行为的分析
2.
Study on the isothermal pretreatment of poly[(methylsilylene)ethynylene];
聚甲基硅次乙炔基硅烷等温预处理过程的研究
3.
The parameters of Ka、Kb、m and n were evaluated by isothermal differential scanning calorimeter(DSC).
为了描述四缩水甘油基-4,4,-二氨基二苯甲烷/1,4-双(4-氨基苯氧基)苯(TGDDM/144BAPB)树脂体系的固化行为,由反应机理提出了一个动力学模型:dα/dt=Ka(1-α)2+Kbαm(1-α)n,由等温差示扫描量热法(DSC)求出参数Ka、Kb、m、n的值,结果表明:由模型算出的反应速率和由DSC实验得出的结果吻合得很好。
4)  Isotherm
等温
1.
The regression equation can be used to determine the average petrophysical parameters for a gas reservoir(Case2)and create the adsorption isothermal curves for various .
并利用拟合得到的回归方程,针对某个气藏(Case2),在确定的平均气层岩心参数的条件下,建立该气藏在给定气层温度下所有组分的吸附等温线。
5)  isothermy
等温
6)  isothermal
等温的;等温线的
7)  isothermal curve
等温线,等温曲线
8)  isothermal solidification
等温凝固
1.
Dynamic simulation of isothermal solidification in steel/Cu/steel system rolling-diffusion bonding process;
碳钢/Cu/碳钢系统轧制——扩散复合等温凝固过程的动力学模拟计算
2.
Simulation of isothermal solidification of ternary alloy with phase-field model;
三元合金等温凝固过程的相场法模拟
3.
Phase-field simulation of isothermal solidification of binary alloy based on KKS model;
基于KKS模型二元合金等温凝固过程的相场法模拟
9)  isothermal forging
等温锻造
1.
Design of heating device for magnesium alloy isothermal forging and temperature curve of die;
镁合金等温锻造加热装置的设计及模具温度曲线
2.
Numerical simulation of grain size during isothermal forging of TC6 alloy;
TC6合金等温锻造过程中晶粒尺寸的数值模拟
3.
Simulation of Isothermal Forging for Superalloy and Analysis of Thermal Load on Die;
粉末高温合金盘件等温锻造模拟及模具热负荷分析
10)  isothermal-heating
等温加热
1.
temperature,a decreased relatively resistivity(namely Δγ) calculating method was proposed based on experiment of testing the change of resistivity of the Cu-CrZr alloy in the isothermal-heating aging process.
通过测试Cu-Cr-Zr合金在等温加热过程中电阻率的变化,提出了一种计算相对电阻率减小值Δγ的方法,并以Δγ作为描述时效过程的参数,对该合金等温加热时效动力学进行了研究。
补充资料:35CrNi3MoV钢等温淬火组织


35CrNi3MoV钢等温淬火组织


  35CrNi3MoV钢等温淬火组织马氏体(绿)+见氏体(棕)残余奥氏体(浅黄)
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条