1) bit consumption
钻头消耗量
2) consumption
[英][kən'sʌmpʃn] [美][kən'sʌmpʃən]
消耗量，消耗率
3) Consumption
[英][kən'sʌmpʃn] [美][kən'sʌmpʃən]
消费，消耗量
4) energy consumption
能量消耗
1.
Based on plenty of experiment data and theoretic research,we have found that in mechanical processing,the total energy consumption depends on the way that the work-piece and the machine tool matches up each other,when we take up different ways in processing the same or various work-pieces.
实际加工中,特别是流水线加工中,由于零件种类和机床数目很多,机床规格也不同,零件与机床的组合情况及能量消耗情况较为复杂。
2.
It carries out a series of experimental study by using the experimental method of engineering hydro- dynamics on the engineering practices such as pressure of air within system, regulation and control method of ?ow change, energy consumption of ventilator, designing method of equality flow field formed in the working phase of detecting platform system, and conforms the desi.
用工程流体力学实验的方法,对系统内气体压力、流量变化的调节控制方法、通风机的能量消耗,以及在检测平台系统工作段形成均匀流动流场的设计方法等工程实际问题,进行了一系列的试验研究。
3.
Analyzes technically the energy consumption at the terminal of central air conditioners and then puts forward the control method of energy consumption.
简要介绍了中央空调的结构原理及在大、中型医院使用现状,并从技术角度对中央空调末端的能量消耗情况进行了分析,进而提出了能量消耗的控制办法。
5) energy cost
能量消耗
1.
The annual output of the iron and steel is on the increase in China,and the energy cost is one third of the total production cost of the iron and steel,so energy saving is the emphasis of the iron and steel industry.
钢铁产量连年大幅攀升,能量消耗约占钢铁生产成本的1/3左右,节约能源是钢铁企业发展的重点,采用震荡燃烧、稀释氧燃烧、直接火焰冲击燃烧、高(焦)炉喷吹废塑料以及微波、电弧和放热加热直接炼钢技术,可以有效地节能降耗,促进钢铁工业可持续发展。
2.
The effects of voltage, pulse-forming capacitance and electrode configuration on the SO2 removal efficiency and energy cost have been investigated in a wire-plate pulsed streamer discharge reactor with flow rate of 200Nm3/h.
在一定实 验条件下,研究了电压、脉冲成形电容及不同线-线间距与线-板间距的配置对反应器的脱硫效率及能量消耗的 影响。
3.
The effects of voltage,pulse-forming capacitance and electrode configuration on the SO_2removal efficiency and energy cost have been investigated in a wire-plate pulsed streamer dischargereactor with flow rate of 200Nm~3/h.
在一定实验条件下,研究了电压、脉冲成形电容及不同线一线间距与线一板间距的配置对反应器的脱硫效率及能量消耗的影响。
6) H 2O 2 consumption
H2O2消耗量
补充资料：高锰酸钾消耗量
分子式：
CAS号：
性质：测定医用高分子材料浸出液中还原物含量的方法，将医用高分子材料的浸出液20ml置于清洁锥瓶内，加硫酸5ml，准确加入高锰酸钾液(0.002mol/L)l0ml煮沸5min，立即加入草酸钠液(0.002mol/L)15ml，脱色后趁热用高锰酸钾(0.002mol/L)滴至微红色，取20ml对照液，按同法试验，二者所消耗的高锰酸钾溶液之差应小于6.5ml，方符合医用要求。
CAS号：
性质：测定医用高分子材料浸出液中还原物含量的方法，将医用高分子材料的浸出液20ml置于清洁锥瓶内，加硫酸5ml，准确加入高锰酸钾液(0.002mol/L)l0ml煮沸5min，立即加入草酸钠液(0.002mol/L)15ml，脱色后趁热用高锰酸钾(0.002mol/L)滴至微红色，取20ml对照液，按同法试验，二者所消耗的高锰酸钾溶液之差应小于6.5ml，方符合医用要求。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条