1) oil trap
阻油池
2) oil pot
油槽，油池
3) battery internal resistance
电池内阻
1.
It is demonstrated that the battery performance can be predicted by monitoring the battery internal resistance,with its measuring method given.
文中分析影响电池性能的主要因素,得出可以通过电池内阻预测电池性能的结论,并给出了电池内阻的测试方法。
4) internal resistance
电池内阻
1.
The components of internal resistance of VRLA battery and its measurement principle and method were analyzed.
分析了阀控铅蓄电池内阻的组成及其测试原理和方法,根据蓄电池内阻与剩余容量的关联性,讨论了利用蓄电池内阻监测其剩余容量的可行性。
2.
The relationship of operating performance of AA size Ni MH cell with its internal resistance during charge,over charge,and high rate discharge are studied using thermocouple method and several other internal resistance measuring methods.
采用多种内阻测量方法和热电偶法，研究了ＡＡ型ＭＨ－Ｎｉ电池在充电、过充电及高倍率放电时电池内阻与电池工作性能的关系。
5) internal resistance of battery
电池内阻
1.
The traditional technique in measuring internal resistance of battery is studied,and a new way to measure the resistance with the lock-in amplifier is put forward,and has been proved by many tests,which can overcome the noise and interference,obtain stable measurement data and realize on-line examination.
本文对传统的电池内阻测量方法进行了研究比较,提出了用锁相放大器测量电池内阻的新方法,通过对多种电池内阻的测量,克服了噪声和干扰,快速获得稳定、精确的内阻测量数据,并能实现在线检测。
6) battery inner resistance
电池内阻
1.
This paper proposed a method of testing battery inner resistance in which virtual instrument technology was applied, introducing the virtual instrument system architecture of battery inner resistance test and the algorithm of software.
提出将虚拟仪器技术应用于蓄电池内阻测试,给出了测试蓄电池内阻的算法和测试 系统的结构组成。
2.
This system adopts four-wire measurement,proposing a method of testing high capacity storage battery inner resistance based on virtual instrument technology.
蓄电池内阻是评估蓄电池性能的一个重要指标,实现单体电池内阻的在线实时监测,对提高直流系统的安全运行、提高供电系统的可靠性和自动化程度,有着十分重要的意义;系统采用四线交流法进行测量,将虚拟仪器技术应用于蓄电池内阻测试,详细介绍了该装置的工作原理及硬件和软件的设计;测量仪分为4个档位,测量时由PC机自动换档,实现了仪表的智能化;该系统具有测量精度高、抗干扰能力强、可实现在线测量等优点,具有良好的实用价值和推广意义。
补充资料：皂化溶解油、肥皂油和调水油
分子式：
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条