1) color aid
着色助剂
2) complementary colors
助着色剂
3) Colouring agent
着色剂
1.
The influences of colouring agents on the dehydrochlorination of flexible PVC;
着色剂对软质聚氯乙烯脱氯化氢反应的影响
2.
Influence of Colouring Agent on Efficiency of Antioxidant and Light Stabilizer in Coloured Plastics Product;
着色剂对塑料制品中抗氧剂、光稳定剂效能的影响
3.
The crystallization process and kinetics of Li2O-Al2O3-SiO2(LAS) glass ceramic containing colouring agent such as Fe2O3,Co2O3 and Ni2O3 were investigated using differential thermal analysis,X-ray diffractometry,infrared and scanning electron microscope,and the effects of Co2O3 and Ni2O3 on the crystallization mechanism of LAS glass were analyzed.
以Li2O-Al2O3-SiO2(锂铝硅)微晶玻璃为研究对象,采用DTA、XRD、IR和SEM等测试技术研究含Fe2O3、Co2O3、Ni2O3锂铝硅玻璃的析晶动力学和晶化过程,分析着色剂成分Co2O3、Ni2O3对锂铝硅玻璃晶化过程及结构的影响机制。
4) Colorant
[英]['kʌlərənt] [美]['kʌlərənt]
着色剂
1.
Determination of colorant in meat product by HPLC;
高效液相色谱法测定肉制品中的着色剂
2.
Effect of Colorant in Feed on Growth and Digestive Enzyme Activities of Pelteobagrus fulvidraco;
饲料中着色剂对黄颡鱼生长和消化酶活性的影响
3.
The antimony ruby glass samples based on Na2O-CaO-SiO2 glass system and doped with colorant were obtained.
在Na2O-CaO-SiO2玻璃系统中引入着色剂,熔制锑红玻璃试样,讨论不同着色剂的用量、不同退火时间对试样透过率的影响。
5) pigment
[英]['pɪɡmənt] [美]['pɪgmənt]
着色剂
1.
Effects of Technical Factors on Stability of Pigment in Adhesive;
工艺因素对着色剂在胶液中稳定性的影响
2.
Properties of nitrite -free hemoglobin pigment, which was prepared from pig blood by using new reagent instead of nitrite, were investigated on change and stability of its color under sunlight and heating.
以新鲜猪血为原料,用新的配体替代亚硝酸钠,与血红蛋白反应,制备新型无硝血红蛋白着色剂。
6) cobalt colorant
钴着色剂
1.
Analysis of XRD and microstructure demonstrate that cobalt colorant can low the sintering temperature of clinker and enhance the quality of cement obviously.
本研究将少量钴着色剂引入白水泥原料中，采用直接法烧制蓝色硅酸盐水泥。
补充资料：低着色残差炭黑
分子式：
CAS号：
性质：亦称低着色残差炭黑(low hysteresis carbon black)，是国外20世纪80年代中期开发的一个炭黑新品种。它的结构较高，加工性能好，炭黑聚集体直径分布宽。用于轮胎可以赋予胶料较低的生热性、低滚动阻力和良好的耐磨性，是节能降耗的优良品种。其生产方法一般采用梯级式反应炉，两级喷油：一级是通过轴向伸入的探管，由里向外；另一级是通过喉管喷油点由外向里，由此而生成低滞后炭黑。
CAS号：
性质：亦称低着色残差炭黑(low hysteresis carbon black)，是国外20世纪80年代中期开发的一个炭黑新品种。它的结构较高，加工性能好，炭黑聚集体直径分布宽。用于轮胎可以赋予胶料较低的生热性、低滚动阻力和良好的耐磨性，是节能降耗的优良品种。其生产方法一般采用梯级式反应炉，两级喷油：一级是通过轴向伸入的探管，由里向外；另一级是通过喉管喷油点由外向里，由此而生成低滞后炭黑。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条