2) injection feed
注射料(注塑)
3) Castables
浇注料
1.
The effects of the grain size of fused corundum and amounts of magnesia,cement and silica micropowder as additives on the behavior of linear expansion of the corundum-spinel castables in sintering process were studied.
在750~1450℃的温度下测量了试样的线膨胀率,研究了电熔刚玉粒度、氧化镁、水泥及硅微粉加入量对刚玉-尖晶石质浇注料烧成过程中线膨胀率的影响。
2.
CO resistance of sol-gel bonded castables was studied together with the CO resistance of cement bonded castables.
研究了新型溶胶-凝胶结合耐火浇注料的抗CO侵蚀性能,同时也与传统的水泥结合耐火浇注料进行了对比试验,并从侵蚀前后的表观特征、理化性能和微观结构等多方面探讨了其CO侵蚀作用机理。
3.
Based on the Problems of heat shack rupturing and desquamating of firebricks on trolley of heat treatment furnaces,the technology measures were put forward irrigating trolley liner using castables with high resisting heat shack performance.
针对台车式热处理炉台车衬砖热震断裂脱落问题,提出了采用高抗热震性浇注料进行台车工作衬整体浇注的技术措施,根据热处理炉的实际工作条件,完成了浇注料的研制,并在实际应用中,取得了良好的应用效果。
4) injection molding material
注塑料
5) grouting materials
注浆材料
1.
Polymer-layered silicate nanocomposites were prepared using the appropriate organic polymermaterials that are selected from the existing chemical grouting materials.
在已有的几种化学注浆材料中选择合适的有机高分子材料,运用纳米技术和现代复合技术制备聚合物基/蒙脱土纳米复合复合材料;确定一系列反应的工艺条件,如蒙脱土的最佳添加量、最佳反应温度及反应时间等;利用X射线衍射仪(XRD)和透射电镜(TEM)等对其进行表征。
2.
Successful experiences,which deals with selection of grouting process,grouting materials and grouting parameter,of using block up water grouting process in Dongshenmiao Mining Co.
从注浆方案的选取、注浆材料及配比、参数的确定、注浆工艺、注浆效果等五个方面介绍了东升庙矿区注浆堵水技术的成功经验,对同类矿山具有一定的指导作用。
3.
Two series of grouting materials including soluble glass–activated industrial residue slag (SAS) and soluble glass–cement (SC) were pre- pared.
针对水玻璃-水泥(soluble glass-cement,SC)注浆材料在地层加固过程中抗水溶蚀性能差和工业废渣得不到有效利用等问题,用工业废渣完全取代SC注浆材料中的水泥制备出水玻璃-工业废渣(矿渣、钢渣、粉煤灰)(soluble glass-activated industrial residue slag,SAS)注浆材料。
6) castable refractory
浇注料
1.
The application of the castable refractory in the carbon kiln lining and the way of improving lining service life;
浇注料在炭素回转窑内衬施工中的应用及提高内衬使用寿命的途径
2.
Effect of Heat Treatment Temperature on Properties of Calcined Flint Clay-Bauxite Castable Refractory
热处理温度对焦宝石-铝矾土浇注料性能的影响
3.
The characteristic of castable refractory was advanced by analyzing the service conditions on Water-cooled Beam of heating furnace in this paper.
通过对加热炉水冷梁使用条件的分析,提出了该类浇注料应具有的特点。
补充资料：注料杆
分子式：
CAS号：
性质：在柱塞式注塑成型机中，把油缸的作用力传递到塑料上，并以较快的速度把一定量的熔料注入模腔的柱塞。
CAS号：
性质：在柱塞式注塑成型机中，把油缸的作用力传递到塑料上，并以较快的速度把一定量的熔料注入模腔的柱塞。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条