1)  auto-slice
真空刮刀
2)  vacuum
真空
1.
Study on regeneration of ethanol-loaded activated carbon by microwave irradiation under vacuum condition;
载乙醇活性炭真空微波解吸实验研究
2.
The research of far-infrared drying of carrot under vacuum conditions;
胡萝卜远红外真空干燥试验参数的研究
3.
Effects of overlap steps on oxygen production by vacuum pressure swing adsorption;
重叠步骤对真空变压吸附制氧性能的影响
3)  vaccum
真空
1.
The influence factors on the polyester polycondensation vaccum system and their treatment;
影响聚酯缩聚真空的因素及处理
2.
Different type of vaccum pump and its combination used in existing polyester plant were introduced,also the economic analysis was done.
介绍已有的聚酯装置中所使用的不同形式的真空泵及组合 ,并对其进行经济分析。
3.
Introduced are four displacing methods, namely complete mixing, non-mixing, vaccum deaeration, and pressure displacement.
介绍了常用的四种置换方法,即完全混合置换、无混合置换、真空置换和加压置换。
4)  vacuum brazing
真空钎焊
1.
The craft and application of vacuum brazing for honeycomb material;
蜂窝材料的真空钎焊工艺及应用
2.
Influence of active element Mg on joint properties of aluminum alloy vacuum brazing;
活性元素镁对铝合金真空钎焊接头性能的影响
3.
Morphology of carbide on diamond interface by vacuum brazing;
真空钎焊金刚石界面碳化物的形貌
5)  vacuum distillation
真空蒸馏
1.
Industrial experiment on recovering metals from waste zinc-tin alloy by vacuum distillation;
真空蒸馏法从废杂锌锡合金中回收金属的工业试验
2.
Cadmium recovery process and modeling in the Ni-Cd batteries by vacuum distillation;
真空蒸馏回收镍镉电池中镉金属工艺优化模型研究
3.
Purification of γ-irradiated 30 % TRPO-ke rosene by vacuum distillation;
真空蒸馏净化辐照后的TRPO煤油体系
6)  vacuum frying
真空油炸
1.
The best processing technology of crispy sweet potato by the method of vacuum frying;
真空油炸甘薯脆片的研究
2.
The manuscript studied the effects of color preservation technology on quality of vacuum fried potato chips by using pretreatment technology before vacuum frying.
采用真空油炸前预处理技术研究了护色工艺对真空油炸马铃薯片品质的影响。
3.
Effects of two pretreatment, combined with vacuum frying on the moisture content, fat content and color value of fried green soy bean were studied.
研究了2种预处理工艺结合真空油炸对毛豆水分质量分数、脂肪质量分数和色差的影响。
参考词条
补充资料:GKH型卧式刮刀卸料离心机
设备概述:

 GK(H)型卧式刮刀卸料离心机是在恒速下操作的间歇式离心机。进料、分离、洗涤、卸料等工序均可在全速下按程序自动循环操作。该离心机处理的滤饼较干,可处理物料的固相颗粒范围大(≥0.01mm)。
 

                                ↑
                        GKH型卧式刮刀卸料离心机 
 

                                 ↑
                        GKH型卧式刮刀卸料离心机  

 工作原理:

 当机器工作时,进料阀自动开启,悬浮液沿进料管进入全速运转的转鼓内,在离心力作用下,悬浮液中大部分液体经滤网、衬网及鼓壁上的小孔被甩出,经机壳的切向排液口流向排液阀。进料阀开启时,排液阀的母液排液阀门同时打开,母液沿母液管路排出。固体则留在转鼓内,加料阀开启到一定的时间后自动关闭,停止进料,物料在转鼓内进一步甩干。物料甩干到一定时间后,洗水阀自动开启,洗水经冲洗管喷淋在固体物料上,此时排液阀的母液排液阀关闭,而水洗排液阀打开,甩出的洗液沿另一管路排走。洗涤一定时间后,水洗阀自动关闭,但是洗涤液出口阀仍然打开,此时转鼓继续在全速运转下,液体不断被甩出,沿洗涤液出口阀排走。
 运转一定时间后,物料被充分甩干,此时装有宽刮刀的刀架自动旋转上升,固体物料被刮下掉进倾斜的卸料斗,沿卸料斗斜面滑下,排出机外,刮刀上升到离滤网一定的距离时,刮刀装置上的连杆碰及行程开关,刮刀停止上升,并随即反向退回原来位置,进入下一个周期。

 性能特点:

 与物料接触部分,采用不锈钢或不锈钢衬里,耐腐蚀。
 采用旋转刮刀,密封性好。
 用电气-液压控制,自动化水平高。
 门盖用摇臂式装置,起闭轻便,易于检修。
 采用弹性基础,起吸振作用。

 典型用途:

 广泛用于化工、制药、轻工、食品等工业部门,如聚乙烯醇、聚氯乙烯,聚苯乙烯,"六六六"、染料、碳铵、滴百虫,蒽、聚甲醛、聚乙烯、硫酸钠、烧碱、盐、淀粉、化肥、铝钒、硼酸、合成橡胶等生产。  

 技术参数: 

项 目 \ 型 号
GK800-N
GK1250-N
GKH800-N(虹吸)
GKH1250-N(虹吸)
转鼓直径 mm
800
1250
800
1250
转鼓转速 r/min
1400
1200
1600
1200
分离因数
900
1000
1145
1000
工作容积 L
95
225
100
355
电机功率 kW
30
55
45
75
长×宽×高 mm
 
2240×1400×1744
2097×1805×1855
1965×2000×1510
2260×1785×1785
机器质量 Kg
3470
4800
4500
6720
说明:补充资料仅用于学习参考,请勿用于其它任何用途。