1) finite element stripwise calculation
有限元切片计算
2) FEM
[英][fem] [美][fɛm]
有限元计算
1.
Combining the FEM calculation results of the stress and strain distributions ahead of the notches of specimens with various prestrain, the effects of the prestrain on fracture behavior of specimen are ana.
并结合有限元计算所得的不同预应变条件下的缺口前端的应力应变场分布，主要分析了预应变对不同组织低合金高强钢缺口试样断裂行为的影响。
2.
The theoretical stress condition and the contrast of the concrete crack,the material of inside and outside have been calculated with finite element method(FEM).
本文对外贴/嵌 FRP 在砌体裂缝处理中的工作性能进行了有限元模拟分析,使用有限元方法对外贴/嵌 FRP 前后砌体裂缝、裂缝内粘材料、FRP 材料的受力状况进行了有限元计算和对比,论证了外贴/嵌 FRP 材料在处理砌体裂缝的优越性。
3) finite element calculation
有限元计算
1.
A finite element calculation and analysis of the drilling floor of the 4000 m truck-mounted rig
4000m车载钻机钻台的有限元计算与分析
2.
The change trend and its causes of ultrasonic plastic welding temperature field is discussed in detail from test result and finite element calculation result of temperature field.
文中对温度场进行了有限元计算,并用数字存储示波器记录了超声波塑料焊接温度场变化曲线,将二者结合起来定性分析了超声波塑料焊接温度场变化的趋势及产生变化的原因,证明压力的存在延缓了温度下降的幅度,要使焊接熔化区充分结合,可以加大压力和保持时间。
3.
An analysis software is developed based on the theory of finite element calculation in an axis-symmetric eddy current electromagnetic field.
根据轴对称涡流电磁场有限元计算的基本原理,开发了有限元分析软件,计算了不同渗碳层深度时涡流检测线圈的感应电压。
4) finite element method
有限元计算
1.
Calculation for ventilation of the bulb tubular turbine generators by finite element method;
灯泡贯流式水轮发电机通风系统的有限元计算
2.
Calculation of 3D temperature field of hydroelectric generator rotor by finite element method;
水轮发电机转子三维温度场的有限元计算
3.
Calculation of 3D temperature field of hydroelectric generator stator by finite element method;
水轮发电机定子三维温度场的有限元计算
5) finite element analysis
有限元计算
1.
Inthis paper, the features of the temperature field in the frozen wall with three rows offreezing pipes are analyzed in detail with the finite element analysis(FEA) software ANSYS, referring to one engi-neering project.
利用 ANSYS大型有限元计算程序,得出了冻结壁厚度、冻结壁平均温度、冻结时间等参数,为冻结井的施工提供了必要的依据。
2.
A full-scale test of the 3 joints and finite element analysis are carried out.
讨论了试验的加载装置、实测结果和有限元计算结果,给出节点应力分布及钢屋盖桁架节点极限破坏荷载。
3.
Aiming at the different included angles of the dovetail groove,the corresponding nonlinear contact finite element analysis was performed with penalty function method.
以某梯形槽O形橡胶密封为研究对象,建立了二维轴对称模型,并运用罚单元算法对不同夹角的梯形槽O形橡胶密封圈进行了接触非线性有限元计算。
6) FEM calculation
有限元计算
1.
The fracture behavior at crack tip on a steel specimen of 16MnR is analyzed by means of 3PB experiments of pre-cracked specimens and FEM calculation.
通过对16MnR钢三点弯曲(3PB)预裂纹试样进行实验和有限元计算,分析了裂纹尖端的断裂行为。
2.
The fracture behavior at crack tip within CMn steel is analyzed based on the experiments of 3 PB precracked specimens and FEM calculation and simulation.
对C Mn钢三点弯曲裂纹试样进行了实验和有限元计算,分析了裂尖断裂行为。
3.
In this paper,bogie frame load determination,analysis and evaluation of FEM calculation result are also presented.
文章对构架载荷的确定、有限元计算结果进行了分析与评定,用数据证实了新设计的优越性。
补充资料：SAMCEF——先进的通用有限元分析软件
SAMTECH公司是通用有限元软件包SAMCEF的开发商和服务商，是欧洲CAE领域的有力竞争者。SAMTECH在航空和航天工业，以及防卫、汽车、能源和造船等工业有广泛的应用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条