1)  tank lining
油罐衬里
2)  oil tank
油罐
1.
Design and application of the automatic desanding equipment for oil tank;
油罐自动清砂工艺装置设计与应用研究
2.
Calclation method of heat of oil tank;
储油罐加热量的计算方法
3.
Mechanical cleaning of large above-ground oil tanks;
地面大型油罐的机械清洗
3)  oil storage tank
油罐
1.
Study on optic fiber sensing liquid level measuring system for oil storage tanks;
油罐光纤传感液位测量系统的研究
2.
Based upon the motion deformation of oil storage tank and analysis of the corrosion of the bottom circumferential plates, an effective high-performance water-proof coating was selected and practical construction scheme was designed, which met the requirements of the corrosion pro- tection for the bottom circumferential plate of the oil storage tank.
根据油罐的运动变形及对其底部边缘板的腐蚀原因分析,介绍了一种有效的技术,即采用一种具有高性能的防水涂料和设计可循的防腐蚀施工方案,从而满足油罐底部边缘板的防护要求。
3.
Centrifuge model tests of oil storage tanks on soft, compressible clay deposits are carried out.
根据某一大型油罐软基加固处理工程方案设计和优选需要,按照离心模型相似律,开展了三组模型试验,分别模拟了天然地基、土工合成材料袋装碎石垫层和既在填土层中设置袋装碎石垫层又在淤泥质粘土层设置土工合成材料排水板三种情况,以研究这一加固布置形式对减小高压缩性软土层地基上油罐罐底的差异沉降效果反应。
4)  tanks
油罐
1.
Application of connection technology in stopping a leak of tanks.;
粘接技术在油罐堵漏中的应用
2.
Views on equipment of burglar alarm system in oil tanks of gas stations.;
加油站油罐内油品防盗装置的设置
5)  tank
油罐
1.
A Discussion on Rationally Choosing Tank Automatic Metering Device Equipment,;
议合理选择油罐自动化计量装置
2.
The enisting situation and develop trend of the automatic measuring technique of oil tank in our country;
我国油罐自动测量技术的现状与发展趋势
3.
The Columnar Tank Calibration System On Leica TCR series Total Station;
基于徕卡TCR系列全站仪的立式油罐容量标定测量系统
6)  oilcan
油罐
1.
Determine the best position of putting out fire power of oilcan for computer simulation;
计算机模拟中油罐灭火力量最佳位置确定方法
2.
Research on the Fire and Explosion Endangerment of the Large-Scale Oilcan;
大型油罐火灾爆炸危害性研究
3.
Presently the domestic and overseas scholars pay more attention to the safety problem of large-scale oilcan section,and the oilcan s explosion resist ability is one of pop research problems.
目前国内外学者日益重视大型储油罐区的安全问题,油罐的防爆炸破坏能力成为研究的热点之一。
参考词条
补充资料:防静电油罐内壁涂料
分子式:
CAS号:

性质:为防止以碳钢等金属材料制成的贮油罐内壁产生和积累静电的涂料。一般采用环氧树脂或聚氨酯树脂为基料,配以特种导电材料、防锈颜料、固化剂和助剂等组成。其特点是表面电阻低、导电性好、能迅速消除静电荷的积累。此外,耐介质(水、煤油、柴油、汽油等)腐蚀性较好,胶值试验符合用户要求。适用于各种贮油罐及槽车内壁。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。