1) cellulose caproate
已酸纤维素
2) cellulose acetate fiber
醋酸纤维素纤维
1.
Simulation of dry spinning of cellulose acetate fibers
醋酸纤维素纤维干法纺丝成形模拟
3) cellulose acetate
醋酸纤维素
1.
Study on preparation and properties of cellulose acetate homogeneous membrane;
醋酸纤维素均质膜的制备及性能研究
2.
Preparation and properties of aqueous cellulose acetate dispersion;
醋酸纤维素水分散体的制备及性质测定
4) Nitrocellulose
[英]['naitrəu'seljuləus] [美][,naɪtro'sɛljə,los]
硝酸纤维素
1.
DSC Analysis of the Effect of Cryogenic Treatment on the Inner Structure of Nitrocellulose in Dilute Solution;
冷冻处理硝酸纤维素稀溶液对其内部结构影响的热分析研究
2.
Adopting 30-second nitrocellulose as the main sticky material, using ethyl acetate, ketone, alcohol and aromatic hydrocarbon as a mixture solvent and modifying nitrocellulose with dimethyl phthalate plasticizer,the prescription of staple adhesive was designed with orthogonal experimental methodology.
选用30s硝酸纤维素作为主要成膜物质,醋酸酯、酮、醇和芳烃作为组合溶剂,邻苯二甲酸酯类复合增塑剂对硝化棉进行改性,采用正交试验方法确定胶黏剂的配方。
3.
A sensitive staining reaction for single-stranded deoxyribonucleic acids (ssDNA) fixed on the nitrocellulose (NC) membrane was studied using manganese (Ⅲ )-tetrakis-(4-aminophenyl ) porphyrin (Mn-TAPP) as a staining reagent.
本文研究了固定于硝酸纤维素滤膜(NC)上单链脱氧核糖核酸(ssDNA)与锰(Ⅲ)-meso-四(4一氨基苯基)卟啉(Mn-TAPP)间的染色反应机理及实用性。
5) CA
醋酸纤维素
1.
Candida rugosa lipase immobilized by special microstructure in CA/PTFE composite membrane;
利用醋酸纤维素/聚四氟乙烯复合膜中的微结构固定化脂肪酶
2.
The PVDF/CA blend ultrafiltration membranes were made by phase reverse method,which were characterized by water flux,protein retention,chemical stability and antifouling.
以醋酸纤维素(CA)作为第二种聚合物成分与聚偏氟乙烯 (PVDF)共混 ,采用相转化法流涎成膜 ;测试了膜的化学稳定性、抗污染性能以及亲水性等性质 ,对影响膜性能的主要因素进行了考察 ;利用DSC扫描等多种手段对PVDF和CA的相容性作了初步探
3.
The results have shown that the interaction occurs between CA and PAN molecules in the solution, and PAN molecules coagulate first from the misture solution.
通过二醋酸纤维素（CA）溶液、以丙烯腈为主体二元共聚物（PA）溶液及两者共混溶液凝胶化过程的显微摄影、高聚物／溶剂／沉淀剂的三元相图以及共混体系的玻璃化转变温度的考查，揭示了CA／PAN／DMAC溶液的相转变特性以及影响其混膜结构和性能的内在因素。
6) cellulose diacetate
醋酸纤维素
1.
Adsorption of Cu~(2+) from aqueous solution on cellulose diacetate/polyethyleneimine blend microporous membrane;
醋酸纤维素/聚乙烯基亚胺共混微孔滤膜对Cu~(2+)的吸附
2.
Studies on preparation of cellulose diacetate membrane for microfiltration by two-step phase separation method;
两步法制备醋酸纤维素微滤膜的研究
补充资料：丙酸纤维素
分子式：
CAS号：
性质：系纤维素分子中羟基为丙酸酯化的一种纤维素酯高聚物。透明、高光泽、高韧性和刚性，有良好的耐候性和耐低温性。但耐酸碱和有机溶剂性差。熔融温度234℃。密度1.18～1.23g/cm3。吸水率1.8％～2.5％。拉伸强度15～39MPa，弯曲模量830～1690MPa，薄膜撕裂强度4kg/mm，耐折80次。系将纤维素在酸性催化作用下与丙酸酐酯化制得。主要用于汽车装饰件，电子电器工业配件和薄膜、片材等。
CAS号：
性质：系纤维素分子中羟基为丙酸酯化的一种纤维素酯高聚物。透明、高光泽、高韧性和刚性，有良好的耐候性和耐低温性。但耐酸碱和有机溶剂性差。熔融温度234℃。密度1.18～1.23g/cm3。吸水率1.8％～2.5％。拉伸强度15～39MPa，弯曲模量830～1690MPa，薄膜撕裂强度4kg/mm，耐折80次。系将纤维素在酸性催化作用下与丙酸酐酯化制得。主要用于汽车装饰件，电子电器工业配件和薄膜、片材等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条