1) aluminium die-casting
压铸铝件
2) Aluminum Die Casting
铝压铸件
1.
Hard Spot and Hard Metallic Inclusion in Aluminum Die Casting;
铝压铸件中的硬质点及硬质金属杂质相
2.
Hard Spots and Nonmetallic Inclusion in Aluminum Die Casting;
铝压铸件中的硬质点及非金属夹杂物
3) Pressure Resistant Aluminum Casting
耐压铝铸件
5) Aluminium alloy pressure-tight shell
铝合金耐压铸件
6) aluminum casting
铝铸件
1.
The Influence of Sharp Cutting-edge on Aluminum Casting Surface;
刀具的锋利刃口对铝铸件表面加工的影响
2.
The electromagnetic pump is one of the most effective method which could produce high grade aluminum casting,in overseas,this technique has already been applied in large-scale complex aluminum casting production,but this technical research in domestic is only at the trial-manufacture stage.
电磁泵是生产高质量铝铸件最有效方法之一,国外已将该技术运用在大型复杂铝铸件生产中,而国内对此技术的研究还处于试制阶段。
补充资料:压铸铝合金的化学成分和力学性能
序号 | 合金牌号 | 化学成分% | 力学功能(不低于) | |||||||||||||
合金代号 | 硅 | 铜 | 锰 | 镁 | 铁 | 镍 | 钛 | 锌 | 铅 | 锡 | 铝 | 抗拉强度6ЪN | 伸长度 δ/% | 布氏硬度HB5 | ||
1 | YZAISil2 | YL 102 | 10.0 13.0 | ≤ 0.6 | ≤ 0.6 | ≤ 0.05 | ≤ 1.2 |
|
| ≤ 0.3 |
|
| 余 | 220 | 2 | 60 |
2 | YZAISi10Mg | YL 104 | 8.0 10.5 | ≤0.3 | 0.2 0.5 | 0.17 0.30 | ≤ 1.0 |
|
| ≤ 0.3 | ≤ 0.05 | ≤ 0.01 | 余 | 220 | 2 | 70 |
3 | YZAISil2Cu2 | YL 108 | 11.0 13.0 | 1.0 2.0 | 0.3 0.9 | 0.4 1.0 | ≤ 1.0 | ≤ 0.05 |
| ≤ 1.0 | ≤ 0.05 | ≤ 0.01 | 余 | 240 | 1 | 90 |
4 | YZAISi9 Cu4 | YL 112 | 7.5 9.5 | 3.0 4.0 | ≤ 0.5 | ≤ 0.3 | ≤ 1.2 | ≤ 0.5 |
| ≤ 1.2 | ≤ 0.1 | ≤ 0.1 | 余 | 240 | 1 | 85 |
5 | YZAISillCu3 | YL 113 | 9.6 12.0 | 1.5 3.5 | ≤ 0.5 | ≤ 0.3 | ≤ 1.2 | ≤ 0.5 |
| ≤ 1.0 | ≤ 0.1 | ≤ 0.1 | 余 | 230 | 1 | 80 |
6 | YZAISil7 | YL 117 | 16.0 18.0 | 4.0 5.0 | ≤ 0.5 | 0.45 0.65 | ≤ 1.2 | ≤ 0.1 | ≤ 0.1 | ≤ 1.2 |
|
| 余 | 220 | <1 |
|
7 | YZAIMg5Sil | YL 302 | 0.8 1.3 | ≤ 0.1 | 0.1 0.4 | 4.5 5.5 | ≤ 1.2 |
| ≤ 0.2 | ≤ 0.2 |
|
| 余 | 220 | 2 | 70 |
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条