说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 悬浮相
1)  suspended phase
悬浮相
2)  inverse suspension
反相悬浮
1.
Preparation of quick-solving anionic starch grafting flocculant by inverse suspension copolymerization and its utilization in treatment of dyeing wastewater;
反相悬浮共聚法制备速溶型阴离子淀粉接枝絮凝剂及其应用于印染废水处理
2.
A new type of crosslinked starch microspheres(CSM) was synthesized in inverse suspension using N,N′-methylene-bis-acrylamide as crosslinking agent.
以N,N′-亚甲基双丙烯酰胺为交联剂,用反相悬浮法合成了新型交联淀粉微球CSM。
3.
Acrylamide(AM),and [2-(methylacryloyloxy)ethyl] trimethylammonium chloride(MAETAC) were grafted onto carboxymethyl cellulose(CMC) to prepare cellulose-modified cationic superabsorbent polymers(SAP) by inverse suspension copolymerization.
为了解决现有高吸水树脂(SAP)产品耐盐能力低、生物降解性差的缺点,利用反相悬浮聚合法,将羧甲基纤维素(CMC)与丙烯酰胺(AM)和甲基丙烯酰氧乙基三甲基氯化铵(MAETAC)接枝共聚,创新合成了分子中同时含有阳离子和非离子亲水基团的CMC改性高吸水树脂(ICAM)。
3)  Aqueous suspension
水相悬浮
1.
Production of Chlorinated PVC resins by aqueous suspension method;
水相悬浮法生产氯化聚氯乙烯树脂
2.
The control steps of the thermal chlorination of isotatic polypropylene in aqueous suspension were studied.
研究了等规聚丙烯水相悬浮热氯化过程的控制步骤,认为随着氯化的进行,氯化过程从表面反应控制逐渐转向灰层扩散控制,并且灰层扩散控制对整个过程起主导作用。
3.
This paper was devoted to the chlorination of IPP by aqueous suspension process, which was simple and produced little pollution.
针对聚丙烯(PP)粘合性差、纤维较难染色、低温呈脆性、收缩率大等缺陷,本文采用工艺简单、污染较少的水相悬浮法对等规聚丙烯(IPP)进行氯化改性,探讨氯化机理并建立动力学模型,研究氯化工艺规律,为工业制备氯化等规聚丙烯(CIPP)树脂打下基础。
4)  dilute suspension
稀相悬浮
5)  inverse suspension method
反相悬浮法
1.
AA-AM supper absorbent resin was synthesized from acrylic acid(AA) and acrylic amide(AM) by inverse suspension method.
对反相悬浮法制备丙烯酸 (AA)和丙烯酰胺 (AM)二元共聚高吸水性树脂的工艺进行了研究。
2.
Poly(sodium acrylate) superabsorbent polymer was synthesized by inverse suspension method,and the material ratios were optimized by orthogonal experiment.
以过硫酸钾为引发剂 ,N ,N 亚甲基双丙烯酰胺为交联剂 ,采用反相悬浮法合成了聚丙烯酸钠高吸水性树脂。
6)  water phase suspension
水相悬浮法
1.
Techno economic evaluation on production of chlorinated paraffin 70 through water phase suspension;
水相悬浮法制氯化石蜡-70技术经济评价
2.
The economic analysis on 1000 t/a chlorinated paraffin70 production by water phase suspension, especially uncertainty analysis, is undertaken and the risk factors are indicated.
概述了氯化石蜡-70产品的用途、市场需求及生产方法,对1000t/a水相悬浮法氯化石蜡-70生产作了经济分析,重点作了不确定性分析,找出了风险因素,并提出相应的措施与建议。
3.
Based on discussiln on reaction mechanism of chlorinating polyvinyl chloride(CPVC) by water phase suspension process and characterization of CPVC samples,differences in production technology of CPVC at home and abroad were analyzed.
通过探讨水相悬浮法氯化PVC的反应机制和表征CPVC样品,分析了国内外CPVC生产技术差距,指出专用PVC的聚合工艺是影响CPVC质量的关键因素,提高PVC及CPVC树脂的分析表征手段是CPVC发展的重点。
补充资料:反相悬浮聚合
分子式:
CAS号:

性质: 分散相是水相,连续相是油相,水溶性单体液滴悬浮在油相中进行的聚合。聚合发生在液滴中,类似于溶液聚合。如丙烯酰胺的反相悬浮聚合,以甲苯为油相,偶氮二异丁腈为引发剂,丙烯酰胺水溶液组成单体液滴分散在甲苯中,分散剂为滑石粉或磷酸钙等。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条