1) dust
屑
2) lithoclast and crystalloclast of volcanic rock
屑与晶屑
3) wood chips
木屑
1.
White rot fungus was immobilized on wood chips has been used for treating cooking wastewater,and the effect of COD removal from coking wastewater by the immobilized white rot fungus has been tested.
以木屑为载体固定化白腐菌对焦化废水进行处理,其对COD的去除率明显高于白腐菌菌丝和木屑的混合物。
2.
This study compared the treatment performances of three biofilters packed with buckwheat hulls (BH),wood chips (WC) and granular activated carbons (GAC) separately for toluene removal.
本论文比较了分别以荞麦皮、木屑和活性炭为填料的过滤塔处理甲苯气体的运行性能。
4) debris
磨屑
1.
Under the analyses of the development state for the debris on-line monitor in gearbox,the paper presents a kind of debris on-line monitor,in which the Electromagnet is used to cluster the debris,and HALL Components are used to measure the changes of the concentration for the debris in oil.
在分析国际上现行的磨屑在线监测传感器的基础上,提出了一种新型的磨屑监测传感器-电磁铁重复聚集磨屑,霍尔器件测量磨屑量的变化的磨屑,并对磨屑的传感与测量方式进行了实验研究。
2.
The wear debris of three semi-metallic friction materials reinforced by low carbon steel fiber,brass fiber and pure copper fiber respectively,and grey cast iron couple woren at different temperatures were studied by XRD and EDAX.
采用X射线衍射(XRD)和X射线能谱分析(EDAX)对分别使用低炭钢纤维、黄铜纤维和紫铜纤维增强的3种半金属摩擦材料与灰铸铁在不同温度下滑动摩擦形成的磨屑进行分析,并结合扫描电子显微镜(SEM)观察摩擦材料表面形貌,分析材料的磨损特性,并对黄铜纤维和紫铜纤维增强的摩擦材料磨屑成分进行对比分析。
3.
The debris of the composite has also been investigated by the DSC,FT-IR and SEM technique.
用环-块磨损实验机对复合材料进行了磨损试验,用SEM方法对复合材料的磨损表面进行了观察和分析,并利用DSC、FT-IR和SEM分析方法对复合材料的磨屑进行了研究,在上述基础上进行了复合材料的磨损机理探讨。
5) scrap iron
铁屑
1.
Magnetic concentrate of Ag and Mn was produced by magnetic separation,and the acid leaching of manganese minerals contained in the magnetic concentrate with scrap iron as a reductant was investigated.
首先,采用磁选法得到银锰磁选精矿,然后用铁屑作还原剂,在酸性条件下湿法浸出银锰磁选精矿中Mn,实现银锰分离,为后续Ag回收工艺创造条件。
2.
The acid leaching of manganese minerals with scrap iron as a reductant was investigated,and a leaching rate of 97.
文章用铁屑作还原剂,在酸性条件下湿法浸出锰,实现锰银分离,为后续银回收工艺创造条件。
3.
Experimental parameter: the proportion of activated carbon and scrap iron is 0.
介绍了活性炭、石灰乳和铁屑法处理镀锌废水的基本原理、工艺流程和工艺流程中的各项试验参数:活性炭与铁屑投料比(按重量)0。
6) chip removal
排屑
1.
Based on the analysis of tapping force system and characteristic of chip removal, it is confirmed that radial force, axial force and jam of chip removal are the main reasons for poor thread quality.
通过对攻丝切削力和丝锥排屑特点的分析,确定径向力、轴向力和排屑不畅是影响攻丝质量的主要因素。
2.
The main factors that affect deep drilling in NC machine are introduced, such as chip removal, tool cooling and angular axis.
指出在数控深孔钻床上完成深孔加工的主要影响因素是解决排屑、冷却和防止钻孔轴线歪斜等问题,介绍了采用穿轴式高压冷却系统和带有开放式钻槽的枪钻,选择合理的切削参数并且可以单次退刀完成钻孔的加工方法,是深孔加工的一种较佳工艺组合。
参考词条
补充资料：滴屑屑
1.颤抖貌。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。