1)  boot
橡胶套鞋
2)  rubber
橡胶
1.
Mechanical properties of modified wollastonite filled in rubber;
超细改性硅灰石/橡胶硫化胶片力学性能研究
3)  Elastomer
橡胶
1.
Investigation on Elastomer Compatibility with an Alternative fuel Gas-to-Liquid;
代用燃料GTL与橡胶材料的相容性
2.
The PDM′s conventional bushing is a screw surface,it is a variable-thickness elastomer stator.
目前,常规螺杆钻具衬套的内表面是螺旋曲面,橡胶衬套厚薄不均,衬套抗变形能力低,单级承压小,泄漏沿程长,机械特性软,热膨胀不均、磨损速度快,故导致效率持续降低。
3.
The effects of biodiesel and diesel on mass, dimension and appearance of elastomers, metals and plastics are comparatively investigated after 28-day immersion.
研究了多种橡胶、金属和塑料在3种生物柴油中浸泡28天后的质量、尺寸及外观变化,并与0号柴油的结果进行对比。
4)  Hevea brasiliensis
橡胶
1.
The Establishment and the Optimization of AFLP System for Hevea brasiliensis;
橡胶树AFLP银染体系的建立和优化
2.
A Preliminary Study on Allelopathy of Areca catechu L.and Hevea brasiliensis;
槟榔、橡胶化感作用的初步研究
3.
Study of Blue Stain Fungi in Hevea brasiliensis and Pinus marssoniana Wood as well as the characteris tics of Ceratocystis sensu lato in the fungi;
橡胶、松树木材变色菌研究及对其中之长喙壳属菌的特性研究
5)  rubber ring
橡胶环，橡胶圈
6)  butadiene-acrylonitrile rubber
丁腈橡胶
1.
Preparation of powdered butadiene-acrylonitrile rubber by coagulation;
用凝聚法制备粉末丁腈橡胶
2.
Morphology and properties of fluoroelastomer/butadiene-acrylonitrile rubber blends;
氟橡胶/丁腈橡胶共混物的相态结构及性能
3.
Preparation and Industrial Enlargement of a Particular Kind of Butadiene-acrylonitrile Rubber;
一种特种丁腈橡胶的制备及工业放大
参考词条
补充资料：橡胶模具、橡胶压模、橡胶硫化模
分子式：
CAS号：

性质：又称橡胶模具、橡胶压模、橡胶硫化模。用于压制橡胶产品的金属模型。一般用钢材(如45号钢)按图纸要求经机械加工而制得，并经热处理以提高其硬度及耐磨性。模具型腔与产品结构相同，型腔尺寸必须考虑不同橡胶的收缩率，在产品尺寸基础上进行放大或缩小，方可得到合适的产品尺寸。模具从工艺操作考虑还要设置流胶槽、启模口、定位销等。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。