1) land
[英][lænd] [美][lænd]
纹间表面
2) surface streak
表面条纹
1.
Countermeasure and analysis about surface streak after corrosion 3003 aluminium alloy foil produced by cast-rolling stock;
铸轧坯生产3003铝合金箔腐蚀后表面条纹的分析与对策
3) surface crack
表面裂纹
1.
Preventive to surface crack of MB15 magnesium alloy Φ482 mm ingot;
MB15镁合金Φ482mm铸锭表面裂纹的预防措施
2.
Surface Cracks in TP2 Copper Tube Billets in Horizontal Continuous Casting;
TP2铜管坯水平连铸表面裂纹研究
3.
An Analysis on Surface Cracks Formation of H Beam of Nb-V Microalloying Steel BS55C;
Nb-V微合金化H型钢BS55C表面裂纹成因分析
4) surface flaw
表面裂纹
1.
The surface flaws of different sizes were introduced into SiC/BN laminated ceramics by Vickers indentation method.
采用压痕法在SiC/BN层状陶瓷试样的表面引入不同尺寸的表面裂纹,利用三点弯曲测量含裂纹试样的极限断裂应力,研究了不同尺寸的表面裂纹对层状陶瓷断裂强度的影响;根据压痕载荷-强度实验结果,测定层状陶瓷的阻力曲线,并与单相SiC陶瓷对比。
5) Surface Texture
表面纹理
1.
Fractal evaluation of surface texture for coarse aggregate and performance test of asphalt mixture
粗集料表面纹理的分形评定及沥青混合料性能试验
2.
And fabric surface texture is of significant effect on garment design and people′s mentality.
棉织物表面纹理的形成受原料、纱线、织物组织、织物紧度、加工方式、印染整理工艺的影响,并对人的心理与服装设计产生重要的作用。
3.
In addition to conventional boundary morphology parameters of wear debris,surface roughness parameters and surface texture index were adopted as important parameters.
提出了一种有效的磨粒类型识别方法,该方法除了选用传统的磨粒形态特征参数,将表面粗糙度和表面纹理指数也作为重要的磨粒识别参数,选用面积、长度、圆度、纤维比率、体态比、边界分形维数、表面粗糙度Sa、Sq和表面纹理指数(Stdi)等9个参数,采用人工神经网络来识别磨粒类型,应用示例表明效果良好,提高了磨粒类型识别的精确度。
6) surface ripple
表面波纹
1.
The surface ripple modality of Si/Ge material 1 06 μm laser-induced is measured by optical microscope.
用光学显微镜分别测量了 1 0 6 μm激光辐照硅、锗材料形成表面波纹的形貌特征。
2.
The mechanism of coherent stimulated light scattering and the characteristics of the surface ripple in the laser interaction with materials is described.
叙述了激光与材料相互作用过程中引起相干受激光散射的机制 ,以及形成材料表面波纹的特性。
补充资料：工业纯铝晶界间表面起泡缺陷
工业纯铝晶界间表面起泡缺陷
工业纯铝晶界间表面起泡缺陷
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条