1) feed
喂
2) Hello!
喂！
3) Wire Feeding
喂丝
1.
Process Practice of a 90 t Ladle Wire Feeding;
90t钢包喂丝的工艺实践
4) feed
喂料
1.
Rheologic behavior of feed of Fe-Ni-Cu-C alloy coarse powder injection molding;
Fe-Ni-Cu-C合金粗粉注射成形喂料的流变行为
2.
The Design of Feed Weight Control Device and Follow－up Adjustment of Imbibition;
叙述了压榨机组操作过程中实现自动均匀喂料和跟踪渗透的新方法。
5) wire feeding
喂线
1.
The results of the rare earth alloy wire feeding process into ladle for 25 t converter at Jinan Iron and Steel Co.
济钢２５ｔ转炉钢包喂稀土合金线的工艺试验结果表明，钢包采用喂线工艺加入稀土合金能明显提高稀土的回收率，平均能达到３６。
2.
The four important problems with regard to wire feeding technology,which are the argon blowing before and after feeding,the feeding speed and the horizontal position of penetration are discussed.
通过对喂线工艺的前吹氩、插入的水平位置、喂线速度及后吹氩四个问题的探讨，推导出前吹氩环流时间，气泡柱最大直径，喂铝线与喂硅钙线的喂线速度，后净化时防卷渣的最大吹氩量等方程式；并针对工业生产的实际需要，提出喂线技术的上述四个问题的工艺操作参数。
3.
This paper describes that the wire feeding technique for producing free cutting steels and alloy steels can replace powder injection.
本文阐明了用喂线代替喷粉精炼易切削钢和合金钢时，同样能改变夹杂物形态和改善钢水流动性，能进一步提高合金元素回收率，降低生产成本，从而获得更好的冶金效果和经济效益。
6) feedstock
喂料
1.
Rheological properties of metal injection molding feedstock using the improved wax-based binder;
改进型蜡基粘结剂的喂料流变性能
2.
when manganese ore powder are pressed to cold-press pellets by twinroller,it appears a serial of problems such as pack set,lack of feedstock,difficulty of stripping and so on.
针对锰粉矿压制冷压球团时压球设备(对辊压球机)出现结拱、喂料不足以及脱模困难等问题。
3.
The paper explores the preparation methods of nanostructrred feedstock for plasma spray.
探索了等离子喷涂用纳米结构喂料的制备工艺,并采用此方法制备了纳米结构的Al2O3-13%TiO2喂料。
参考词条
补充资料：冻喂
1.冻馁。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。