1) Perfectly rough surface
完全粗糙表面
2) rough surface
粗糙表面
1.
The lubrication mechanism of floating-rig journal bearings under rough surface;
粗糙表面下牙轮钻头浮动套轴承润滑机理研究
2.
Study of measurement system for rough surface accuracy;
粗糙表面精度测量系统的研究
3.
High-order kirchhoff approximation for gaussian dielectric rough surface electromagnetic scattering;
高斯介质粗糙表面电磁散射的高阶基尔霍夫法
3) surface roughness
表面粗糙
1.
In the article,the surface roughness of Oriented Strand Board has been researched from the air forming,applying the surface fine material to improve the board-surface smooth.
本文对定向结构刨花板表面粗糙问题从工艺和设备上进行深入的研究 ,通过气流铺装施加表面细化材料以提高板面平整度。
2.
Simulation of Surface Roughness and Processing Fault Effects on Microchannel Flows;
本文在前人的基础上,对微槽道表面粗糙度和加工缺陷对流动的影响作了数值模拟。
4) rough surfaces
粗糙表面
1.
Some researchers studied normal contact stiffness between rough surfaces in theory, their researches, however, are all based on the statistically describing results of the micro profile of rough surfaces.
指出了以往有关粗糙表面法向接触刚度理论研究工作的缺陷与不足 ,并在一定的前提假设下 ,基于球体与平面的接触理论和粗糙表面的分形接触理论 ,从理论上给出了具有尺度独立性的粗糙表面法向接触刚度分形模型 ,并进行了数字仿真研究。
2.
Scattering from 1 dimensional random rough surfaces with varying roughness was investigated by numerical integration based on Kirchhoff approximation.
本文在Kirchhof近似基础上,利用数值积分方法分析了一维随机粗糙表面的散射特征。
3.
In order to study the PIM power level as a function of the tightness of the junction, the roughness of the waveguide surface, the thickness of the oxide layer on the metal surface and the input carrier power, firstly developed an equivalent ciurcuit model based on the rough surfaces contact model and then calculated the third order PIM power level using power series method.
基于粗糙表面接触模型建立了MIM结构的等效电路模型,然后采用幂级数法计算三阶PIM功率,研究了波导连接的紧固度、波导表面的粗糙度、波导金属表面的氧化层厚度及输入载波的功率对PIM功率的影响。
5) roughness surface
粗糙表面
1.
Fractal and statistical study of the fault attitude and roughness surface;
断层产状及粗糙表面的分形统计研究
2.
Influences of the cavitations between the asperities on roughness surfaces on flow factors were investigated.
研究了粗糙表面上微凸体间气穴对用于混合润滑分析的流量因子的影响。
3.
Lubricant thermal influence on flow factors were investigated based on randomly generated roughness surfaces,expanded cavitation equation,and lubricant energy equation.
在利用自编程序产生了具有不同纹理方向的随机粗糙表面的基础上,使用扩展的气穴方程和润滑剂能量方程等分析了润滑剂的热作用对压力流量因子的影响。
6) rough surface
表面粗糙
1.
Reasons and solving measures of rough surface in protecting project;
防护工程表面粗糙原因分析及解决措施
补充资料:Pro/Engineer Drawing 表面粗糙度
1 概述
我们可以添加标准形式的表面粗糙度,下面列出了这些标准形式
Generic 切削加工 非加工
no_value
standard value value value
7.3.2 添加表面粗糙度
选择 DETAIL> Create > Surf Finish.
如果你还没有添加任何一种表面粗糙度,或者需要添加另一种类型的表面粗糙度,你需要“Retrieve”表面粗糙度;如果你需要添加已经存在的类型,你可以使用"pick Inst"选项;也可以使用"Name"选项
选择表面粗糙度的放置方式(有引线箭头、附着实体等)
选择需要的放置实体
输入表面粗糙度的值
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条