2) rotary joint
旋转接头
1.
Study and Develop on the High-speed Multi-channels Rotary Joint;
多通道高速旋转接头的开发和研究
2.
Orthogonal test was performed to determine the laser phase-transformation hardening process suitable for a rotary joint made of 35CrMo alloy,which was aiming at increasing the wear-resistance of the rotary joint.
为了提高35CrMo旋转接头的耐磨性,采用正交试验法研究了35CrMo旋转接头激光相变硬化适合的工艺方法和参数,获得的优化工艺参数为激光功率P=1500W,光斑直径D=3。
3) head of rotated riveter
旋铆头
1.
Ti/TiN/(Ti-Zr)N/ZrN multi-layer film is deposited on head of rotated riveter by using multi-arc ion plating method.
采用多弧离子镀法在旋铆头沉积Ti/TiN/(Ti-Zr)N/ZrN多层膜处理,并对旋铆头的失效形式、膜层的组织形貌、显微硬度、耐磨性能进行了分析和讨论。
4) swirling flow head
旋涡头
1.
This paper is mainly written about numerical simulation of swirling liquid-flow fields in even diameter hole and ring-shaped hole combined with the swirling flow head which has three nozzles.
运用了CFD通用软件Fluent和Gambit分别对具有3个喷嘴旋涡头的等直径圆管内和环形圆管内的旋涡液流场进行了数值模拟,并将模拟结果用矢量图、流线图、云图及曲线图表示,通过对模拟结果的分析和比较,显示了强制环流装置的优越性,为进一步研究提供了理论依据。
5) rotating joint
旋转接头
1.
Through analyzing interior structure of the rotating joint of HK-250 drilling machine, the causes of mud leakage and main shaft departure from center line were investigated, and the improvement measure was provided that is replacing the rotating joint of HK-250 by the rotating joint of DD-14OB drilling machine.
针对HK-250钻机旋转接头泥浆跑漏和主轴偏离中心线问题,从分析HK-250钻机旋转接头内部结构入手,查找造成泥浆跑漏和主轴偏离中心线的原因,进而提出改进措施,将DD-14OB钻机的旋转接头改装在HK-250钻机上。
6) spin Connector
旋冲接头
补充资料：头旋
头旋 头旋 证名。感觉自身与周围景物旋转。又称头晕。《医碥·眩晕》：“晕与运同，旋转也，所见之物皆旋转如飞，世谓之头旋是也。”详头晕条。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条