1) voxel volume
体素体
2) voxel
[vɔk'sel]
体素
1.
Application of Compressed Voxelmodel in Five-axes NC Milling Simulation;
压缩体素模型在五坐标数控仿真中的应用
2.
3D Visual Modeling System for Geological and Mining Engineering-Oriented Voxel-based Algorithm for Computing Mine Excavations;
面向地矿工程体视化仿真系统的计算采掘工程量的体素法
3.
Simulation of multi-axis milling based on voxel model;
基于体素模型的多坐标铣削加工仿真
3) solid voxelization
实体体素化
5) δ-ferrite
δ-铁素体
1.
The high δ-ferrite number(level)in 1Cr18Ni9Ti austenitic stainless steel is the main factor to affect its rolling(forging)billet surface quality.
1Cr18Ni9Ti奥氏体不锈钢中δ-铁素体数量(级)过高是影响其轧(锻)坯表面质量的主要因素。
2.
With Thermocalc thermodynamic equilibrium phase calculations and experimental analysis,the effect of chemical compositions and heat treatment temperature on δ-ferrite content in T122 heat resistant steels was studied.
采用Thermocalc热力学计算研究了化学成分和温度对T122钢中δ-铁素体含量的影响,计算和相应试验结果表明,化学成分和热处理温度变化对δ-铁素体含量影响显著,铬含量降低,氮含量和碳含量增加,能明显降低δ-铁素体含量。
3.
Due to large amounts of ferrite former in the steel,the formation temperature ofδ-ferrite is lowered down,and thereforeδ-ferrite is apt to be produced during hot working.
采用光学显微镜、扫描电镜和能谱分析研究了含W型10%Cr(质量分数)超超临界钢中δ-铁素体的组织形貌与微观结构。
6) δ-ferrite
δ铁素体
1.
Effect of δ-ferrite on impact properties of 12%Cr rotor steel for ultra-supercritical steam conditions;
δ铁素体对12%Cr超超临界转子钢冲击性能的影响
2.
The matrix of the powders was principally austenite;as the particle size decreased,the matrix changed from austenite to a composite consisting of austenite andδ-ferrite.
粉末基体组织以奥氏体为主,仅小粒径粉末基体由奥氏体与δ铁素体组成。
3.
The results obtained by SEM,EDAX,AES and metallographic analysis have showed that the surface films of the weld metals after sodium corrosion mainly consist of chromium carbides and NaCrO2, and corne off to form sodium corrosion pits in some area,the pattern of sodium corrosion is the pitting and preference solution of δ-ferrite, the mean corrosion depth of the met.
SEM,EDAX,AES和金相分析表明,钠蚀后焊缝表面膜主要由铬的碳化物、NaCrO_2组成,局部脱落形成钠蚀坑,钠蚀形态为点蚀和δ铁素体优先溶解,平均钠蚀深度为7。
补充资料：奥氏体-贝氏体球铁
分子式：
CAS号：
性质：又叫奥-贝球铁。基体组织为奥氏体加贝氏体组织的球墨铸铁。这类球铁硅含量一般在1.4%～3.8%。含锰量小于0.5%，与普通球铁比较硅偏高、锰偏低。通过调节化学成分与热处理获得理想的奥-贝球铁的基体组织为针状贝氏体或无碳贝氏体一富碳奥氏体。这类球铁具有优良的综合机械性能、强度高、耐磨性好、韧性好、特别是有高的缺口韧性，可代替钢，用于制作重要受力结构件，如曲轴、齿轮、凸轮轴等。
CAS号：
性质：又叫奥-贝球铁。基体组织为奥氏体加贝氏体组织的球墨铸铁。这类球铁硅含量一般在1.4%～3.8%。含锰量小于0.5%，与普通球铁比较硅偏高、锰偏低。通过调节化学成分与热处理获得理想的奥-贝球铁的基体组织为针状贝氏体或无碳贝氏体一富碳奥氏体。这类球铁具有优良的综合机械性能、强度高、耐磨性好、韧性好、特别是有高的缺口韧性，可代替钢，用于制作重要受力结构件，如曲轴、齿轮、凸轮轴等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条