1) Styron
[英]['staɪərən] [美]['staɪrən]
斯蒂伦[聚苯乙烯]
2) Styrafil
['staiərəfil]
斯蒂拉菲尔[玻璃纤维增强聚苯乙烯][商]
3) polystyrene
[英][,pɔli'staɪri:n] [美]['pɑlɪ'staɪrin]
聚苯乙烯
1.
Thermal degradation mechanism of polystyrene by TG-MS;
热重质谱法研究聚苯乙烯热降解机理
2.
Study on recycling of polystyrene resin by thin film drying;
薄膜干燥法再生聚苯乙烯树脂的研究
3.
Synthesis of Polystyrene/Polyaniline Core-shell Materials with Enhanced Electrochemical Activity;
具有高电活性的聚苯乙烯/聚苯胺核壳材料的制备
4) PS
[英][,pi: 'es] [美]['pi 'ɛs]
聚苯乙烯
1.
Effect of Superabsorbent Polymer on Water-disintegrable Properties of PS;
高吸水树脂对崩解型聚苯乙烯性能的影响
2.
Preparation of GO/PS Nano-composite;
聚苯乙烯/氧化石墨纳米复合材料的制备
3.
Study on Water-Destructible Performance of Modified PS;
改性聚苯乙烯的水崩解性能研究
5) Styrene
[英]['stairi:n] [美]['staɪrin]
聚苯乙烯
1.
Study on preparation of polystyrene/aluminum superfine composite particles;
聚苯乙烯/铝粉超细复合粒子制备研究
2.
Preparation and Tribological Properties of Self-assembled Polystyrene Film;
硅表面聚苯乙烯自组装超薄膜的制备及摩擦磨损性能研究
6) Polystyrene(PS)
聚苯乙烯
1.
Epoxy ether terminated polystyrene(PS) oligomer was prepared by reaction of the polystyrene anions with ethylene glycol diglycidyl ether.
采用阴离子聚合法,以正丁基锂(n-BuLi)为引发剂、乙二醇二缩水甘油醚(EGDE)为封端剂,在常压惰性气体保护下引发苯乙烯(St)聚合,制得端环氧基聚苯乙烯低聚物(PS-ep)。
2.
Three kinds of solutions were prepared by dissolving polystyrene(PS) in tetrahydrofuran(THF),N,N-dimethyl-formamide(DMF) and toluene respectively,then were electrospun to fibers of sub-micron in diameters.
将聚苯乙烯(PS)分别溶于四氢呋喃(THF)、N,N-二甲基甲酰胺(DMF)、甲苯3种溶剂中,用静电纺丝法制备了直径在亚微米级的纤维。
3.
The procedures are as follows:emulsifier-free emulsion polymerization method was applied to synthesize polystyrene(PS)microspheres which was to be used as template,and the template was used in the reaming of silica,after macroporous silica was prepared as the carrier,alkali metals Cs was loaded through microwave method,and the related characterization of the catalyst was made.
用无乳化剂乳液聚合法合成聚苯乙烯(PS)微球为模板剂,对SiO2进行扩孔,制备大孔SiO2载体,用微波负载法负载碱金属Cs,并对催化剂进行相关表征。
补充资料：聚苯乙烯/聚乙烯共混物
分子式：
CAS号：
性质：由聚苯乙烯与聚乙烯系列为主组成的共混物，添加少量第三组分，如氢化丁苯嵌段共聚物或接枝共聚物等作增容剂，既有聚苯乙烯良好的成型加工性和刚性，又改善其脆性、应力开裂及耐油性，例如：80份聚苯乙烯与20份聚乙烯共混，加入10份氢化丁苯热塑性弹性体，冲击强度可达36.7kJ/m2，拉伸强度为20.8MPa，可通过机械共混或反应挤出共混制备，用于含油脂较多的食品包装容器，如乳制品包装等方面。
CAS号：
性质：由聚苯乙烯与聚乙烯系列为主组成的共混物，添加少量第三组分，如氢化丁苯嵌段共聚物或接枝共聚物等作增容剂，既有聚苯乙烯良好的成型加工性和刚性，又改善其脆性、应力开裂及耐油性，例如：80份聚苯乙烯与20份聚乙烯共混，加入10份氢化丁苯热塑性弹性体，冲击强度可达36.7kJ/m2，拉伸强度为20.8MPa，可通过机械共混或反应挤出共混制备，用于含油脂较多的食品包装容器，如乳制品包装等方面。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条