1) chase for silk-screen printing
丝网印刷用的框架
2) screen printing frame
印刷网框
3) screen-printing
丝网印刷
1.
Effects of different materials for making pore in paste on TiO_2 films prepared by screen-printing technique;
丝网印刷胶体组成中不同造孔剂对TiO_2薄膜性能的影响
2.
Studies on the BaFe_(12)O_(19) ferrite permanent thick films prepared by screen-printing;
丝网印刷制备钡铁氧体永磁厚膜的研究
3.
To solve the problems of field emission capability and short lifetime of screen-printing carbon nanotube(CNT) thin film cathode,a novel post-treatment with high-temperature sintering and plasma bombarding is presented.
针对丝网印刷碳纳米管(CNTs)薄膜阴极场发射能力差和寿命短等问题,提出了一种能有效改善其场发射性能的高温烧结和等离子轰击后处理方法。
4) silk screen printing
丝网印刷
1.
The silk screen printing originating in China can be traced back to more than 2,000 years ago.
丝网印刷最早起源于中国,距现在已有二千多年的历史了。
2.
In the electronics industry, the silk screen printing is inseparable with the electronics product, thus becoming new realm of the electronics silk screen printing.
丝网印刷以其独特的自身特点,成为目前应用领域最广泛的印刷方法。
5) screen printing
丝网印刷
1.
Analysis on the quality problems of graphite coating of screen printing for plunger;
活塞丝网印刷石墨涂层质量问题分析
2.
Preparation of a photopolymerisable photosensitive emulsion for screen printing and its properties;
光聚合型丝网印刷感光胶的制备和性能
3.
Screen Printing Industry Going to Internet;
丝网印刷业走进Internet
6) screen-printed
丝网印刷
1.
Preparation of Micro-electrode by Screen-printed Technology;
用丝网印刷技术制备薄膜微电极的方法研究
2.
Comparative Study of Various Enzyme Immobilization Techniques on Screen-printed Electrodes;
用于丝网印刷电极条上几种固定酶方法的比较研究
3.
A sensitive amperometric screen-printed enzyme electrode suitable for detection of organophos- phate pesticide residue was developed, which can be operated at a low applied potential of 0.
制备了用于有机磷农药检测的电化学生物酶电极,并从工作电极上修饰物的选择、测定电压的确定、生物酶电极预活化时间的选定、测定时间的选定、温度的影响、pH值的影响、底物浓度的影响、固定方法的选择、固定酶时温度和时间的影响等多方面对丝网印刷的生物酶电极进行了较为全面的研究,应用经过优化的生物酶电极对有机磷农药乙基对氧磷进行了检测。
补充资料：丝网印刷软塑油墨
分子式：
CAS号：
性质：由合成树脂、颜料、溶剂和辅助料组成。合成树脂经溶剂溶解后与一定量的颜料、填料、助剂配成树脂液，经搅拌碾磨调配而成。产品为黏稠液状物，流动性好，有红、黄、绿、蓝、黑、白、金、银等多种颜色，附着力强，耐酸碱，耐磨性好，丝印后表面干燥比硬塑油墨快。适用于聚氯乙烯软塑制品及火焰处理后的聚乙烯、聚丙烯软塑制品印刷，亦可用于聚氯乙烯人造革制品及塑料玩具上。
CAS号：
性质：由合成树脂、颜料、溶剂和辅助料组成。合成树脂经溶剂溶解后与一定量的颜料、填料、助剂配成树脂液，经搅拌碾磨调配而成。产品为黏稠液状物，流动性好，有红、黄、绿、蓝、黑、白、金、银等多种颜色，附着力强，耐酸碱，耐磨性好，丝印后表面干燥比硬塑油墨快。适用于聚氯乙烯软塑制品及火焰处理后的聚乙烯、聚丙烯软塑制品印刷，亦可用于聚氯乙烯人造革制品及塑料玩具上。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条