1) aqueous adhesives,glue
水胶
2) joiner's glue
水胶
3) hydrophilic colloids
亲水胶体
1.
Effect of hydrophilic colloids on storage stability and sensory quality of defatted yoghurt;
亲水胶体对脱脂发酵乳储存稳定性和感官品质的影响
2.
The properties of several hydrophilic colloids were compared and two of them were chosen to form a complex, which made of the jelly sweets with a transparent, soft and elastic texture.
采用广东阳春春砂仁的提取浓缩物为原料,选择并比较了几种亲水胶体的凝胶性能及形成凝胶软糖的工艺条件。
4) hydrocolloids
亲水胶体
1.
Application of hydrocolloids on stabilizing banana juice;
亲水胶体在稳定香蕉饮料中的应用
2.
On Hydrocolloids and Its Complex Gums Used in Meat Products;
亲水胶体及其复配胶在肉制品中应用的研究进展
3.
The rheological properties of pumpkin cloudy juice were related with its concentrations (soluble solids)and the properties of different hydrocolloids (CMC, guar gum and xanthan gum).
本文研究了浓缩至不同浓度的南瓜混汁的流变性质,它与浓度(47～63°Brix)和添加不同亲水胶体(CMC、瓜尔胶和黄原胶)的性质有关。
5) water binder ratio
水胶比
1.
For water binder ratio 0.
目的研究不同粉煤灰的掺量和不同水胶比条件下粉煤灰混凝土的绝热温升和胶凝材料水化速率的发展规律。
2.
By using drying and wetting cycles in water and sulfate solution,the effects of several factors on the resistance to sulfate attack of lightweight aggregate concrete were studied,the factors include:water binder ratio,air-entrained agent,content of fly ash and lightweight aggregate.
采用在水中和硫酸盐溶液中立浸并进行干湿循环的试验方法,分析讨论了水胶比、引气剂掺量、粉煤灰掺量及轻集料对轻集料混凝土抗硫酸盐侵蚀性能影响的规律。
6) water to binder ratio
水胶比
1.
The effect of water to binder ratio (w/b) and fly ash type on fly ash-saturation was investigated under full hydration condition in mortar system.
并结合实验探讨了充分水化条件下,水胶比、粉煤灰种类等因素对砂浆体系中粉煤灰最佳掺量的影响规律。
2.
The influence of water to binder ratio(W/B) and fly ash addition together on the autogenous shrinkage of concrete was experimentally studied under the condition of that the compressive strength at 7 day were the same.
在保持混凝土7d抗压强度不变的条件下,研究了水胶比和粉煤灰掺量变化对混凝土的自收缩的综合影响。
3.
The effect of densified silica fume on low workability concretes under different water to binder ratio was studied.
在不同的水胶比条件下,考察了凝聚态硅灰对低工作性混凝土强度发展历程的影响。
参考词条
补充资料：夹布输水胶管
分子式：
CAS号：
性质： 夹布胶管的一种。产品结构和制造工艺与普通夹布胶管相同。内层胶一般用天然、丁苯、顺丁等橡胶及其并用胶料，外层胶常掺用部分氯丁橡胶以提高其耐老化性能。管体较轻便、柔软，适用工作压力为0.3～0.7MPa，内径范围为扎3～152mm。主要用于输送水及中性液体。
CAS号：
性质： 夹布胶管的一种。产品结构和制造工艺与普通夹布胶管相同。内层胶一般用天然、丁苯、顺丁等橡胶及其并用胶料，外层胶常掺用部分氯丁橡胶以提高其耐老化性能。管体较轻便、柔软，适用工作压力为0.3～0.7MPa，内径范围为扎3～152mm。主要用于输送水及中性液体。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。