1) comb plate light
梳齿板灯
2) stripping comb
梳齿板
1.
In this paper, the chemical composition of plastics stripping comb of Shelboume stripper header is analyzed with infrared ray spectrum and electronic diffraction spectrum.
利用红外光谱仪及电子衍射能谱仪对谢尔本脱收台梳齿板塑料的化学成分进行了分析,并对该塑料的拉伸强度、硬度及不同条件下的耐磨性进行了测试,对拉伸断面和磨损表面进行了扫描电镜观察和分析。
3) seperating plate
齿条分梳板
1.
Conclusion is made that it is important to employ new clothing and to increase speed of taker in roll and to employ seperating plate and rotating plate and self adjusted motion for high quality products.
从高产梳棉机及与之配套的梳理器材等多方面入手 ,介绍了环锭纺梳理技术的发展和应用 ,认为采用新型针布、提高刺辊 锡林速度、刺辊下采用齿条分梳板、回转盖板反转、锡林前后采用固定盖板以及采用清梳联和先进的自调匀整机构等各项新技术 ,对老厂设备改造、提高纺纱质量是十分必要
4) saw-tooth carding plate
锯齿分梳板
1.
To discuss the effect of pin carding plate on fiber length distribution in the card slivers,length tests to the card slivers under different carding plate gauge,taker-in speed and doffer speed using pin carding plate and saw-tooth carding plate under the card taker-in by USTER AFIS single fiber tester were done.
为探讨梳针分梳板对生条中纤维长度的影响,用AFIS单纤维测试仪,对在梳棉机刺辊下分别加装梳针分梳板和锯齿分梳板时在不同分梳板隔距、刺辊转速、道夫转速条件下所加工的生条进行长度检测。
2.
To research the effect of pin carding plate on removal of neps in the card slivers,nep tests to the card slivers under different processing conditions using pin carding plate,saw-tooth carding plate and taker-in grid under the card taker-in by USTER AFIS single fiber tester were done.
为研究梳针分梳板对棉结去除的影响,用AFIS单纤维测试仪对梳棉机刺辊下采用梳针分梳板、锯齿分梳板、小漏底在不同加工条件下所加工的生条进行棉结检测,结果显示:1)在隔距较小范围内,梳针分梳板去除棉结和SCN能力更强一些;2类分梳板去除棉结和带籽屑棉结(SCN)能力都比加小漏底方案要好。
3.
To research the effect of pin carding plate on removal of impurities from card slivers,impurities tests were carried out for the card slivers under different gauges,taker-in speeds and doffer speeds using pin carding plate,saw-tooth carding plate and taker-in grid under the card taker-in by USTER AFIS single fiber tester.
为研究梳针分梳板对去除生条中杂质的影响,用USTER AFIS单纤维测试仪对梳棉机刺辊下加装梳针分梳板、锯齿分梳板和采用小漏底在不同隔距、刺辊速度、道夫速度条件下所加工的生条进行杂质检测。
5) front teethof comb plate
(自动扶梯)梳板前端梳齿
6) gear planing
梳齿
1.
The principle of gear planing by discontinuous generating is introduced and two kinds of techniques are presented based on this principle.
简介了间断展成梳齿原理及连续和间歇分度梳齿工艺方法,研究了其特点、生产率等问题,其加工精度、效率和成本皆优于滚齿和插齿,是值得推广应用的新工艺。
2.
In this paper, the mathematical model for gear planing of precise and hardened gear is established.
建立了硬齿面梳齿过程的数学模型,给出了计算齿面棱峰高度、刀刃接触长度、切削面积等的计算框图和计算结果,对进一步提高加工精度和生产率提供了科学的根据。
补充资料：百齿梳
1.一种多齿的梳子。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条