1) sample holder
试样座
2) span of impact specimen supports
冲击试样支座跨距
3) sample block
样品基座
4) specimen
[英]['spesɪmən] [美]['spɛsəmən]
试样
1.
Discussion on Classification and Assessment of the Steel Plate Specimens after Tensile or Cold Bending Test
钢板拉伸与冷弯试验后试样分类及评定的探讨
2.
The relevant tensile test specimens were designed and tested; then the test results were compared and analyzed to obtain the ultimate bearing stress.
首先设计了相应的拉伸试样,进而对试验结果进行了对比分析,得到补焊焊缝的极限承载应力,为补焊管道的安全评价提供了依据。
3.
Elastic-plastic stress fields on the crack-tips were obtained by use of the finite element analysis to the single edge notched bend(SENB) and single edge notched tension(SENT) specimens of irradiated A533B pressure vessel steel at-60 ℃,-40 ℃,-20 ℃temperatures and at various loading levels.
针对经过辐照的A533B压力容器钢,采用有限元方法对单边缺口弯曲和拉伸试样进行弹塑性数值计算。
5) Sample
[英]['sɑ:mpl] [美]['sæmpḷ]
试样
1.
On the importance of undisturbed soil sample s preparation in geotechnical test;
浅谈原状土试样制备在土工试验中的重要性
2.
The macroscopical survey and micro cosmic analysis of unqualified cold bending test samples of Q235and HP295hot -rolling plate had been stu died.
对Q235及HP295热轧板冷弯不合格试样进行了宏观观察及微观分析。
3.
The effects of different preparation of beer samples on the determination of beer concentration were investigated in the aspects of alcohol content, real extract and original extract, and preliminary study on its contributing factors was also done in this paper.
研究了不同啤酒试样制备方法对测定啤酒中酒精度、真正浓度、原麦汁浓度所产生的影响 ,并初步探讨了影响因
6) test sample
试样
1.
The preparation technology of test sample in infrared absorption spectroscopy analysis;
现代红外光谱分析中的试样制备技术
2.
This paper theoretically analyzes the additional stress of test sample caused by inaccurate axisymmetric stress distribution of the upper and lower grip of tension tester and the meaning of e calculation formula.
主要从理论上分析了由于试验机上下夹头不同轴给试样所带来的附加应力,以及同轴度e计算公式的 内在涵义,实际上反映了附加弯曲应力占拉应力的百分数。
补充资料：环形试样
分子式：
CAS号：
性质： 用于测定橡胶拉伸强度用的一种试样，试样呈环形，可以用冲切，也可用旋转裁切而得。目前比较常用的测定橡胶拉伸强度用试样为哑铃形试样，但有时会出现在标线外或夹持器处断裂，按标准规定无法求得它的拉伸强度值，此时必须采用环形试样。
CAS号：
性质： 用于测定橡胶拉伸强度用的一种试样，试样呈环形，可以用冲切，也可用旋转裁切而得。目前比较常用的测定橡胶拉伸强度用试样为哑铃形试样，但有时会出现在标线外或夹持器处断裂，按标准规定无法求得它的拉伸强度值，此时必须采用环形试样。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条