1) wet carbonization
湿碳化法
2) wet oxidation
湿法氧化
1.
Contrasting dry oxidation technic in cooling tower,introduced the technological process and advantage of wet oxidation.
对比氧化冷却塔干法氧化工艺,简述湿法氧化的工艺流程及该法的优越性。
2.
On the basis of analyzing traditional technologies,such as catalysis and oxidation by high temperature,wet oxidation,UV assisted wet oxidation etc,the paper introduces the new technologies which are researched in the lab or are tentatively applied,for example Resistance,Electric conductivity,UV/VIS absorbance,Ozonization chemiluminescence,Sonoluminescence and s.
本文详细阐述了TOC的测量方法,在对传统测量分析方法(如高温催化氧化、湿法氧化、紫外辅助湿法氧化等)总结的基础上,对目前新颖的测量分析方法(电阻法、电导法、紫外吸收、臭氧氧化发光、超声空化声致发光等)在原理、可行性、现状等几个方面给予了充分的分析说明,同时对不同的测量分析方法在研发和应用中应注意的有关问题进行了评述。
3.
Review on basic principle of wet oxidation is given.
综述了湿法氧化的原理,介绍了Fenton组合技术和TiO_2光催化氧化等氧化技术,并对应用前景作了展望。
3) wet chemical methods
湿化学法
1.
Research progress in preparation of quasi one-dimensional nanosized materials by wet chemical methods;
湿化学法制备准一维纳米材料的研究进展
2.
Comparing with the conventional ones,WO3 nano-powder prepared by wet chemical methods is thinner and more on the control of distribution of grain degree,and it’s with good uniformity and dispersivity.
综述了目前国内外湿化学法制备纳米WO3粉体的主要方法:水解法、沉淀法、溶胶-凝胶法、水热合成法及微乳液法,并对各种制备方法的优缺点进行了简要的讨论。
4) wet chemical method
湿化学法
1.
Synthesis and performance of chromium-doped spinel lithium manganese oxide prepared by wet chemical method;
掺铬锂锰氧化物的湿化学法合成与性能
2.
The optically variable pigments were produced by wet chemical method,and mica titanium having interference colors acted as host materials.
采用具有干涉色的云母钛作为基质材料,通过湿化学法制备随角异色功能颜料。
3.
4))O_3 porcelain powder is prepared by wet chemical method and it is characterized by X-ray Diffraction(XRD),infrared( IR),transmission electronic microscope(TEM).
针对微波介质瓷料系统成瓷过程中介电损耗较大且成瓷温度较高的问题,采用湿化学法制备(Ag0。
5) Wet digestion
湿法消化
1.
Wet digestion-hydride generator atomic fluorescence spectrometry for determination of mercury in beans;
湿法消化-氢化物原子荧光法测定豆类食品中汞的含量
2.
The samples are dissolved by wet digestion with HNO_3-HClO_4,using SrCl_2 to prevent interference of coexistence.
用原子吸收法测定4种植株的不同部位中的K、Ca、Mg、Mn、Cu、Zn等6种矿质元素含量变化,样品采用HNO3-HClO4湿法消化,并用SrCl2消除共存离子的干扰,建立了在同一种溶液中测定多种元素的方法,该方法简便、快速、准确,测定结果满意。
6) wet-chemical method
湿化学法
1.
Nanocrystalline YAG powders and translucent ceramics by wet-chemical method;
湿化学法合成YAG纳米粉体及透明陶瓷
2.
Nanocrystalline α-Al2O3 powder was prepared by a wet-chemical method calcining the dry NH4Al(OH)2CO3 precursor synthesized from NH4Al(SO4)2 and NH4HCO3.
以湿化学法制备的纳米α-Al_2O_3粉体作为添加剂,MgO和SiO_2为烧结助剂,对商用γ-Al_2O_3粉体预处理后,采用无压烧结工艺,有效的降低了烧结温度。
3.
(Luoyang Institute of Refractories Research, Ministry of Metallurgical Industry) ABSTRACT Sb_1O_3-doped SnO_2 semiconductor ceramics was prepared by means of wet-chemical method and thick film technology and its ethanol-sensing characteristics were measured.
采用湿化学法和厚膜技术制备了掺Sb_2O_2的SnO_2半导体陶瓷以测试其酒敏特性。
补充资料：碳化硅晶须补强碳化硅陶瓷基复合材料
分子式：
CAS号：
性质：以碳化硅陶瓷为基和以碳化硅晶须为增强剂的新型陶瓷材料。通过晶须的载荷转移、拔出及裂纹偏转作用，获得比普通碳化硅更高的强度和韧性。使用温度达1400℃。是一种重要的高温结构陶瓷。用于燃气轮机叶片等高温部件和耐磨件制造。采用原位生长工艺和烧结工艺制取。
CAS号：
性质：以碳化硅陶瓷为基和以碳化硅晶须为增强剂的新型陶瓷材料。通过晶须的载荷转移、拔出及裂纹偏转作用，获得比普通碳化硅更高的强度和韧性。使用温度达1400℃。是一种重要的高温结构陶瓷。用于燃气轮机叶片等高温部件和耐磨件制造。采用原位生长工艺和烧结工艺制取。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条