说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 深部处理
1)  less superficial treatment
深部处理
2)  deep treating agent JY-8
深部处理剂JY-8
1.
This paper describes a new deep treating agent JY-8.
采用深部处理剂JY-8与聚合物形成强度较大的凝胶体,作为地层内残余聚合物很好的固定剂和絮凝剂,实现了"二剂合一",达到对地层进行深部调剖、驱油的目的;成胶时间和凝胶强度可通过JY-8的加入量等进行调节。
3)  advanced treatment
深度处理
1.
Application of reverse osmosis technology for the advanced treatment of petrochemical waste water;
反渗透深度处理炼化废水的应用研究
2.
Study on coagulation and ozonation in advanced treatment of diosgenin wastewater;
混凝沉淀-臭氧氧化深度处理皂素废水的实验研究
3.
Study on advanced treatment of coking wastewater by iron-carbon micro-electrolysis process;
铁炭微电解深度处理焦化废水的研究
4)  deep cryogenic treatment
深冷处理
1.
Study on magnetic deep cryogenic treatment process of 65 Mn steel;
65Mn钢磁场深冷处理工艺研究
2.
Effects of deep cryogenic treatment on microstructures of low carbon steels;
深冷处理对低碳钢组织与性能的影响
5)  Cryogenic treatment
深冷处理
1.
Numerical simulation of transient temperature field of 7A04 aluminum component during cryogenic treatment;
7A04铝合金构件深冷处理过程瞬态温度场的数值模拟
2.
Effects of Cryogenic Treatment on Microstructure and Properties of Al_2O_3 Particle and Fibre Hybrid Reinforced Aluminum Matrix Composites;
深冷处理对Al_2O_3陶瓷颗粒纤维增强铝基复合材料的影响
3.
Numerical simulation of eliminating residual stress in aluminum alloy plate by cryogenic treatment;
深冷处理消除铝合金板材残余应力的建模与仿真
6)  intensive treatment
深度处理
1.
The intensive treatment of paper mill effluent with biological stuffing process;
生物填料法深度处理造纸废水
2.
Pilot study on intensive treatment of landfill leachate by flocculation-Fenton-biological aerated filter process;
混凝-Fenton-BAF深度处理垃圾渗滤液中试研究
3.
Intensive treatment of landfill leachate is the key tache for letting out leachate in the range of permission, the principle and specialty of intensive treatment of landfill leachate were introduced.
垃圾渗滤液的深度处理是渗滤液实现达标排放的关键环节 ,总结了渗滤液深度处理方法的原理及特点 ,指出了存在的问题及其发展趋势。
补充资料:深冷处理
      将钢制品冷至 0℃以下温度的处理方法。广义而言,这也是一种金属热处理。深冷处理的主要目的是促使淬火后的钢中残留奥氏体转变为马氏体,使残留奥氏体量减到最低限度。最常采用深冷处理的是高碳高铬工具钢和高速工具钢。这些钢淬火后含大量残留奥氏体。如回火前在-72℃深冷处理,再施以二次回火,可大大提高工件的尺寸稳定性。其他采用深冷处理的材料还有铬轴承钢、量具用钢、表面渗碳钢、马氏体不锈钢、马氏体时效钢等。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条