1) hot spark plug,hot-type plug
热型火花塞
2) fever type
热型
1.
Methods 202 FUO patients were chosen and their causes were categorized,the fever type and changes of fever process were observed by the curves of temperature changes.
目的分析不明原因发热(FUO)患者的病因,观察发热热型和热程变化,评价降温护理效果。
3) heated-mold continuous casting
热型连铸
1.
Cu-Sn alloy wires were prepared by the "heated-mold continuous casting+cold deformation+ recrystalliza- tion annealing + cold deformation" technics.
通过"热型连铸法+冷拔+再结晶退火+冷拔"工艺制备的Cu-0。
2.
The contrast of heated-mold continuous casting of copper rod experiments on two different structural molds were carried out.
用两种结构铸型进行了热型连铸铜杆对比试验研究,结果表明,提高铸型温度梯度有利于稳定固液界面的位置,从而扩大热型连铸工艺参数配合的范围。
3.
By approprizte process parameters,the Al-1%Si alloy wire with good surface quality and unidirectional dendritic crystal was fabricated on the self-made horizontal heated-mold continuous casting equipment.
在自制的水平热型连铸设备上,采用一定的工艺参数,制备出了表面呈镜面,内部组织沿轴向定向排列的柱状晶Al-1%Si线材,其与金属型生产的多晶线材相比,屈服强度提高40%,伸长率提高35。
4) Heated mold continuous casting
热型连铸
1.
Research in mechanical properties of heated mold continuous casting Cu-Al-Be super-elastic alloy wires;
热型连铸Cu-Al-Be超弹性合金丝机械性能的初步研究
2.
The cold-working property of Cu-Al-Mn superelasticalloy cast by heated mold continuous casting;
热型连铸超弹性Cu-Al-Mn合金的冷加工性能
3.
Effects of Ti addition on grain growth of Cu-Al-Ni alloy cast by heated mold continuous casting process;
Ti对热型连铸Cu-Al-Ni合金晶粒长大的阻碍作用
5) OCC
热型连铸
1.
Numerical Simulation of Influence of Processing Parameters on the Position and Shape Features of Liquid-solid Interface in Ohno Continuous Casting (OCC);
热型连铸工艺参数对液固界面形状位置特性影响的仿真
2.
Application of PLC in Temperature Control Systems of OCC;
PLC在热型连铸温度控制系统中的应用
3.
The Mg-Al eutectic alloy wires with 5 mm diameter were manufactured successfully using Ohno Continuous Casting(OCC).
利用热型连铸法(OCC),成功拉制出φ5 mm的Mg-Al共晶合金线材。
6) Heated Mould Continuous Casting
热型连铸
1.
3-D Simulation of Microstructure of Pure Cu in Heated Mould Continuous Casting;
纯铜热型连铸过程三维微观组织模拟
2.
Numerical Simulation of Microstructure Formation during Solidification Process in Heated Mould Continuous Casting;
热型连铸凝固过程微观组织形成的数值模拟
3.
By appropriate process parameters,the Ag-Cu-Zn alloy ingot with good surface quality and even unidirectional microstructure was fabricated on the self-designed horizontal heated mould continuous casting apparatus.
在自制的水平式热型连铸设备上,选用合适的工艺参数制备出了表面质量良好、内部组织沿轴向均匀分布的Ag-Cu-Zn合金铸棒。
参考词条
补充资料：阿尔塞特克斯防御型和进攻型手榴弹
Image:1160720900081225.jpg
阿尔塞特克斯防御型和进攻型手榴弹
产品名称：阿尔塞特克斯防御型和进攻型手榴弹 alsetex defensive and offensive grenades
生产单位：法国阿尔塞特克斯武器研究公司 sae alsetex,fr
现状：生产
用途：杀伤有生目标
概 述
阿尔塞特克斯防御型手榴弹和进攻型手榴弹由法国阿尔塞特克斯武器研究公司研制和生产。现仍在生产，并装备法国陆军。
结构特点
防御型手榴弹采用厚壁钢弹体，而进攻型手榴弹则采用薄壁钢弹体。除此以外，两种手榴弹内装梯恩梯炸药，并采用阿尔塞特克斯f5a式延期引信。引信有烟火延期装置，延期时间为5s，可保证使用和贮存的安全性。
性能数据
防御型 进攻型
弹径 55mm 60mm
全弹长 100mm 95mm
全弹质量 540g 140g
装药类型 梯恩梯 梯恩梯
装药质量 56g 90g
延期时间 5s 5s
说明：补充资料仅用于学习参考，请勿用于其它任何用途。