1) hot-working characteristic
热加工性能(冶)
2) hot workability
热加工性能
1.
The hot workability of the Ni-free type dual phase stainless steel 00Cr21Mn5Ni1N is studied by thermocompression test and thermal tensile test.
结果表明,00Cr21Mn5Ni1N双相不锈钢在950~1 200℃之间变形时,具有良好的热加工性能,钢中奥氏体相量可以控制在适合热加工的范围。
2.
The homogenizing treatments and it ′s effect on hot workability of IN706 alloy was studied in this paper.
对ＩＮ７０６合金的均匀化处理工艺进行了探索，同时研究了均匀化处理对材料热加工性能的影响。
3.
The hot workability of high-carbon-chromium bearing steel has been studied by means of the hot torsion.
用热扭转实验方法研究高碳铬轴承钢的热加工性能。
3) hot-workability
热加工性能
1.
With Al content increasing, Uniphase austenite area decreases or disappears, the liquefaction temperature becomes low, and hot-workability worsens.
随铝含量增加单相奥氏体区变小变无, 液化温度降低,热加工性能恶化。
2.
This article describes grain refinement of γ-TiAl-based composites and their improved hot-workability.
论述了γ-TiAl基复合材料的晶粒细化行为及其改善的热加工性能,对该材料热加工后的显微组织、压缩和拉伸性能、等温锻造变形等作了讨论。
4) melt processing properties
热塑加工性能
5) heating performance
加热性能
1.
The heating performance of solar-energy-heat-pump water heater was studied,which was designed and made independently.
在自行设计制作的试验台上进行了太阳能热泵热水器加热性能试验。
2.
Ejecting and heating performance of the heater at low steam pressure was studied through the experimental method.
用试验方法研究了该加热器在低进汽压力下的引射性能和加热性能。
6) Hot Workability
热加工性
1.
Effect of Nb- and V- Microalloying on Hot Workability of High Carbon Steel;
Nb-和V-微合金化对高碳钢热加工性的影响
2.
A Study on Hot Workability of Super Duplex Stainless Steel 00Cr25Ni7Mo4N;
00Cr25Ni7M04N超级双相不锈钢热加工性能的研究
补充资料：催化剂热加工
分子式：
CAS号：
性质：又称催化剂热加工。指催化剂制备过程中的热处理步骤，如滤饼或浸渍了活性组分的载体的烘干、热分解、焙烧等，也指催化剂使用过程中活化、再生等热处理步骤。如碱性催化剂在使用前需加热脱气，以排除吸附的水分和二氧化碳等。
CAS号：
性质：又称催化剂热加工。指催化剂制备过程中的热处理步骤，如滤饼或浸渍了活性组分的载体的烘干、热分解、焙烧等，也指催化剂使用过程中活化、再生等热处理步骤。如碱性催化剂在使用前需加热脱气，以排除吸附的水分和二氧化碳等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条