1) aluminium coating
热镀铝法
2) Alplate process
铝锌法热镀锌
3) hot dip aluminizing
热浸镀铝
1.
Kinetic Study of High Temperature Oxidation of Hot Dip Aluminizing Steel;
钢材热浸镀铝抗高温氧化的动力学研究
2.
Cyclic oxidation behavior in water-vapour atmosphere of ferritic-martensitic steel T91 coated by hot dip aluminizing
T91钢热浸镀铝及其在水蒸汽中的循环氧化行为
3.
A brief introduction of the principles,methods(Cook-northnan,and Sendzimir),research development and industrial applications of hot dip aluminizing technology was presented.
介绍了热浸镀铝技术的原理和熔剂法、森吉米尔法两种主要工艺,概括了热浸镀铝技术的研究进展和工业应用趋势,指出加入适量的稀土元素在热浸镀层中能有效地改善镀层耐蚀性、耐高温氧化性、成形性和装饰性。
4) hot-dipped aluminum
热浸镀铝
1.
Microstructure observation of coating prepared by hot-dipped aluminum and laser remelting on the surface of 5CrNiMo;
5CrNiMo热浸镀铝激光重熔层组织观察
2.
The effect of rare earth on microstructure components and corrosion-resistance of hot-dipped aluminum was studied.
研究了富铈稀土对碳钢热浸镀铝合金组织及耐腐蚀性的影响。
3.
To overcome this problem, hot-dipped aluminum (HDA) was treated by PEO technique in this paper, and multilayer composite coatings which consisting of Fe-Al layer, Al layer, and Al_2O_3 layer were formed on steel substrate.
针对这一难题,本文采用PEO方法对热浸镀铝钢进行陶瓷化处理,在钢表面制备了包含Al_2O_3层、Al层和Fe-Al层的多层涂层。
5) hot-dip aluminizing
热浸镀铝
1.
Oxidation resistance of hot-dip aluminizing on ductile iron;
球墨铸铁热浸镀铝的抗氧化性
2.
High temperature oxidation resistance of hot-dip aluminizing layer of 0Cr18Ni9Ti austenitic stainless steel
0Cr18Ni9Ti奥氏体不锈钢热浸镀铝层的抗高温氧化性能
3.
A portable corrosion rate meter was used to comparatively measure the annual corrosion rates of 20 steel tube and its integral hot-dip aluminizing coating in acidic and alkali corrosive mediums.
采用便携式瞬时腐蚀速度测量仪,对20钢及其热浸镀铝件分别在酸性和碱性介质中测定年腐蚀速率并进行比较。
6) hot-dip aluminized steel
热镀铝钢
1.
This article introduces a kind of welding process of hot-dip aluminized steel plate(δ>five millimeters) by manual metal-arc welding adopting 18-8 stainless steel electrode,and analyzes the organize of the joint.
热镀铝钢板由于具有钢的强度和铝覆层的优异的耐蚀性、耐热性等,应用日益广泛。
2.
The welding process is effective on hot-dip aluminized steel.
热镀铝钢采用钨极氩弧焊,充填18-8型不锈钢焊丝,可以使焊接接头具有良好的强度和耐腐蚀性能,是焊接热镀铝钢的有效方法。
补充资料：铝热法
分子式：
CAS号：
性质：用铝粉为还原剂的一种金属热还原法。铝粉与金属氧化物反应，产生足够的热量，使还原的金属和形成的渣熔融分离而获得金属或合金。例如铝粉和氧化铁反应产生熔融的铁并和矿渣分离。广泛用于生产工业纯金属(如锰、铬、钒等)、无碳或低碳铁合金和金属焊接等方面。
CAS号：
性质：用铝粉为还原剂的一种金属热还原法。铝粉与金属氧化物反应，产生足够的热量，使还原的金属和形成的渣熔融分离而获得金属或合金。例如铝粉和氧化铁反应产生熔融的铁并和矿渣分离。广泛用于生产工业纯金属(如锰、铬、钒等)、无碳或低碳铁合金和金属焊接等方面。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条