1) fuel pump case,fuel pump housing
燃油泵体
2) fuel oil
燃油
1.
Study on the filter adhesive used to strengthen the automotive fuel oil filter paper;
汽车燃油滤清器滤纸增强用滤芯胶的研究
2.
Thermodynamic functions in the course of forming oleic acid/ammonia fuel oil alcohol water microemulsion system;
油酸/氨水-醇-燃油-水微乳体系形成过程热力学函数的研究
3.
Experimental Research on Combustion Characteristics of Magnetized Fuel Oil for Small Off Gun;
小油枪燃油磁化燃烧特性的试验研究
3) fuel
燃油
1.
Investigation on a fire accident in a fuel boiler room;
一起锅炉燃油火灾爆炸事故的调查
2.
Pollutional control of fuel systems for diesel locomotives;
内燃机车燃油系统的污染控制
3.
A Water Hammer Fuel Supercharging System of Gasoline Direct Injection;
一种用于缸内直接喷射的燃油水击增压系统
4) burning oil
燃油
1.
Measure method of burning oil pressure on electric control oil injection engine;
电控汽油喷射发动机燃油压力的测量方法
5) bio-oil
生物燃油
1.
The transportation of heat carrier is a key link of the procedure of bio-oil production.
热载体输送是生物燃油生产过程中的关键环节,输送过程的保温程度和输送效率直接影响生物燃油的生产。
2.
It's the key technology during the process of producing bio-oil to heat through heat-carrier,whether it's advanced or not is connected directly with the cost of bio-oil.
热载体加热是生物燃油生产过程中的关键环节,热载体技术先进与否直接关系到生物燃油的生产成本。
3.
This paper mainly introduced the theoretical basis,specified designing plan and the operating principle about the fuel-heating system of disel engine which use bio-oil/disel mixed fuel,founding solid base for the application of the bio-oil/disel mixed fuel on the common engine.
主要介绍了生物燃油/柴油混合燃料柴油机燃油加温系统设计的理论依据、具体的设计方案及其工作原理和过程,为生物燃油/柴油混合燃料能够在普通柴油机上推广应用奠定基础。
6) Fuel metering
燃油计量
1.
Study on fuel metering for the micro turbine engine;
微型涡喷发动机燃油计量技术研究
参考词条
补充资料:旋转壳体泵
分子式:
CAS号:
性质:又称皮托管泵。旋转的圆筒壳体内装有固定皮托管的动力型泵。液体在中心沿轴向进入壳体。在壳体的外缘部分,液体因离心力作用而增加其压力和速度。皮托管集流器对着旋转方向的开口,置于接近壳体外壁处,以把液体的大部分动能转换为静压能。而后,液体通过集流器支撑臂中的孔道回到泵的中心,排到排出管。为安全起见,旋转壳体封闭在静止的第二层壳体或转子套中。这种泵流量小、扬程高,在相同使用条件下,较容积型泵或多级离心泵尺寸小、成本低,具有平滑的流量,无脉动。又因在液流中无紧密配合的零件,即使干运转也不会磨损。但液体中的固体颗粒会使皮托管受腐蚀,液体中含有气体时效率很快下降。
CAS号:
性质:又称皮托管泵。旋转的圆筒壳体内装有固定皮托管的动力型泵。液体在中心沿轴向进入壳体。在壳体的外缘部分,液体因离心力作用而增加其压力和速度。皮托管集流器对着旋转方向的开口,置于接近壳体外壁处,以把液体的大部分动能转换为静压能。而后,液体通过集流器支撑臂中的孔道回到泵的中心,排到排出管。为安全起见,旋转壳体封闭在静止的第二层壳体或转子套中。这种泵流量小、扬程高,在相同使用条件下,较容积型泵或多级离心泵尺寸小、成本低,具有平滑的流量,无脉动。又因在液流中无紧密配合的零件,即使干运转也不会磨损。但液体中的固体颗粒会使皮托管受腐蚀,液体中含有气体时效率很快下降。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。