1) telcomer
嵌聚物
2) block copolymer
嵌段共聚物
1.
Study on synthesis and properties of poly(L-lactide)-poly(ethylene glycol) block copolymers;
聚丙交酯——聚乙二醇嵌段共聚物的合成与性能研究
2.
Synthesis and properties research of poly(ether sulphone)s block copolymers containing phthalazinone;
新型含杂萘联苯聚醚砜类嵌段共聚物的合成与性能研究
3.
Computer simulation of micro-phase separation in poly-siloxane block copolymer;
聚硅氧烷嵌段共聚物中微相分离的计算机模拟
3) diblock copolymer
嵌段聚合物
1.
Mesoscopic dynamics simulation of diblock copolymer:Morphology and kinetics;
介观动力学模拟嵌段聚合物:形貌与动力学
4) Diblock copolymer
嵌段共聚物
1.
The synthesis and characterization of diblock copolymer PS-b-PEA;
PS-b-PEA嵌段共聚物的合成与表征
2.
Phase diagram of diblock copolymer confined in a cylindrical nanopore with polymer-grafted surface;
嵌段共聚物受限于软孔内的自组装
3.
Modification of epoxy resin by addition amphiphilic diblock copolymer PEO-PPO-PEO
嵌段共聚物PEO-PPO-PEO增韧环氧树脂的研究
5) Block copolymers
嵌段共聚物
1.
Synthesis of AB block copolymers of glycolide and ε-caprolactone initiated by organic ammonia calccum;
有机氨钙催化合成乙交酯ε-己内酯AB型嵌段共聚物
2.
~2H NMR studies of the structural evolution and water dynamics in lyotropic liquid crystals containing block copolymers
~2H NMR研究嵌段共聚物溶致液晶相的结构演化与水分子动力学行为
3.
MPEG was used to prepare amine-terminated poly(ethylene glycol) monomethyl ether(MPEG-NH_2),which was used to initiate NCA ring opening polymerization to produce poly(L-Alanine)/poly(ethylene glycol) monomethyl ether(PLAM) diblock copolymers.
以聚乙二醇单甲醚(M PEG)为原料,制备了端氨基聚乙二醇单甲醚(M PEG-NH2),并以此作为大分子引发剂,引发NCA开环聚合,合成了不同含量的聚L-丙氨酸-聚乙二醇嵌段共聚物(PLAM)。
6) block polymer
嵌段聚合物
1.
The concept of macromonomer and the synthesis of hydrophilic macromonomer were introduced in this article, accompanied with the discussion on the application of macromonomer in graft copolymer, block polymer, polymeric nanosphere, biochemistry and medicine field.
阐述了自由基聚合、原子转移自由基聚合、生物合成等亲水性大分子单体合成方法,介绍了聚乙烯吡啶等一些重要的亲水性大分子单体的合成,论述亲水性大分子单体在聚合物分子设计和改性方面的作用及在合成接枝聚合物、嵌段聚合物、高分子纳米微球和生命科学及医学领域中的应用。
2.
A polyazoester initiator was used to synthesize polystyrene/polyaerylamide (PSt/PAM) block polymers by its consecutive decomposition in styrene(St) and aerylamide(AM).
采用聚偶氮酯引发剂,合成了聚苯乙烯/聚丙烯酰胺嵌段聚合物(PSt/PAM)。
3.
SROPE technology is compounding high content of effective oil into thermoplastic polymer with add the third element of the block polymer,to produce the masterbatch whose oil be coming out for a long time without rapid bleeding out,it could add the specific efficacy for the polymer.
SROPE技术是用加入第三组分嵌段聚合物的方法使大剂量的功能性油剂混入热塑性聚合物中,制成具有油剂缓慢析出性能的母粒,可赋予聚合物一定的功能性。
补充资料:聚碳酸酯聚二甲基硅氧烷嵌段共聚物
分子式:
CAS号:
性质:又称聚碳酸酯聚二甲基硅氧烷嵌段共聚物。分子链中同时含有聚碳酸酯和聚二甲基硅氧烷结构的嵌段共聚物。具有坚韧而透明的特点。因二甲基硅氧烷链节的引入,降低了纯聚碳酸酯(PC)的软化温度和熔融黏度,提高了冲击韧性和热分解温度范围。其薄膜的物理机械性能与PC基本相似,而氧气透过率却高约10倍。由α,ω-二氯聚二甲基硅氧烷与双酚A和光气反应制得。可用挤塑、铸塑、模塑法成型加工。主要用作宇宙飞船供氧系统、潜水艇和水下实验室呼吸系统、人工心肺机等用的薄膜。
CAS号:
性质:又称聚碳酸酯聚二甲基硅氧烷嵌段共聚物。分子链中同时含有聚碳酸酯和聚二甲基硅氧烷结构的嵌段共聚物。具有坚韧而透明的特点。因二甲基硅氧烷链节的引入,降低了纯聚碳酸酯(PC)的软化温度和熔融黏度,提高了冲击韧性和热分解温度范围。其薄膜的物理机械性能与PC基本相似,而氧气透过率却高约10倍。由α,ω-二氯聚二甲基硅氧烷与双酚A和光气反应制得。可用挤塑、铸塑、模塑法成型加工。主要用作宇宙飞船供氧系统、潜水艇和水下实验室呼吸系统、人工心肺机等用的薄膜。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条