说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 潜水泵厂
1)  immersible pump plant
潜水泵厂
2)  submersible pumping station
潜水泵泵站
1.
For a large submersible pumping station, the inlet forms forward and lateral in the forebay are compared, the distribution flow status of the lateral inlet is analyzed, and measures for rectification are proposed.
针对大型潜水泵泵站,比较前池正向进水与侧向进水形式的特点,分析侧向进水形式的配水流态,并提出整流措施。
3)  submersible pump
潜水泵
1.
Design of large draining sand submersible pump for mine;
大型矿用排沙潜水泵的设计
2.
Development of 125CQB5-150 type magnetic drive submersible pump;
125CQB5—150型磁传动潜水泵的研制
3.
Application of large submersible pump with epicyclic gear to Huangtang Pumping Station;
带行星齿轮大型潜水泵在黄塘泵站的应用
4)  submersible pump
潜水电泵
1.
New seal leak detection system for submersible pump;
一种新型潜水电泵密封检漏系统
2.
Technique & method for failure detection of submersible pump;
潜水电泵失效检测技术与方法
3.
Development of the intelligent monitoring instrumentation for submersible pump;
潜水电泵智能监控仪的研制
5)  diving pump
潜水泵
1.
This paper makes the calculation of diving pump hold power steel beem for rebuilding the head of channel pump station at Da ang Irrigation Area.
对大昂灌区渠首泵站换泵更新改造进行了潜水泵持力钢梁验算,结果表明,该泵站换泵更新改造方案是可行的。
2.
One type of compensating on-site system in diving pump motor was developed.
本文详细叙述了深井潜水泵电机终端无功就地补偿装置的构成及应用效果,对供水公司用电如何节能降耗有一定的参考价值。
6)  submersible motor pump
潜水电泵
1.
Deciding the area of cable for starting submersible motor pump in condition of far distance between the transformer and motor;
潜水电泵远距离起动所需电缆面积的确定
2.
Some investigations and analysis have been done on some domestic factories and research sectors which produce submersible motor pumps and oil sleeves.
较全面地介绍了国外深海采矿扬矿硬管系统设备的结构和主要技术参数 ,对国内潜水电泵、石油套管生产厂家和研究部门进行了调研和分析。
3.
Introduce operation instructions, peculiarity of structure, procedure of development, productive benefit, market trends, developing foreground of submersible motor pump used in coal mine, etc.
叙述了煤矿用潜水电泵的使用要求、结构特点、研制程序、生产效益、市场动态和发展前景等。
补充资料:潜水泵标准汇总
标准编号
标准中文名称
标准英文名称
GB/T2816-2002
井用潜水泵
Submersible pumps for deep well
JB/T10179-2000
混流式、轴流式潜水泵
 
ANSI/API RP 11S 1-1987
电动潜水泵拆卸报告
(Electrical Submersible Pump Teardown Report)
ANSI/IEEE 1019-1992
规定潜水泵电缆性能用推荐规程.聚丙烯绝缘
(Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene Insulation)
ANSI/API RP 11S 4-1993
电动潜水泵安装尺寸和选择
(Sizing and Selection of Electric Submersible Pump Installations)
ANSI/API RP 11S 5-1993
电动潜水泵电缆系统应用的推荐规程
(Recommended Practice for Application of Electric Submersible Cable Systems)
ANSI/API RP 11S 8-1993
电动潜水泵系统振动
(Electric Submersible Pump System Vibrations)
prEN 13386-1998
液泵 潜水泵和泵部件 特殊安全要求
Liquid pumps - Submersible pumps and pump units - Particular safety requirements
DIN 14426-1985
消防.轻便式涡轮潜水泵
(Portable submerged turbopump for fire brigade)
JIS B8325-2003
水池用潜水泵
(Submersible motor pumps for sump)
JIS B8324-2003
深井潜水泵
(Submersible motor pumps for deep well)
JIS A8604-1994
建筑工程用潜水泵
(Submersible pumps for construction)
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条