说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 频率调制—调频
1)  POM/FM
频率调制—调频
2)  frequency modulation
频率调制
1.
Numerical analysis for the stochastic resonance of frequency modulation;
频率调制随机共振的数值分析
2.
A reflective dielectric resonator of performing frequency modulation for incident vibrated signal;
一种对振动信号实现频率调制的反射型介质谐振器
3.
Characteristic Analysis of Wavelength Tuning and Frequency Modulation of Coupled Cavity Laser Diodes;
耦合腔激光器的波长调谐与频率调制特性分析
3)  FM
频率调制
1.
In order to meet the requirement of high speed underwater acoustic communication,the OFDM/FM method is given in the paper,which is based on the orthogonal frequency division multiplexing(OFDM)technique.
为满足高速水声通信的需要,在对正交频分复用(OFDM)技术的原理进行研究的基础之上,结合水声信道的特性,给出了进行二次频率调制(FM)的OFDM/FM实现方法,并通过仿真得到了该方法的性能。
4)  modulation frequency
调制频率
1.
The effect of modulation frequency on phase demodulation is analyzed in sinusoidal phase modulating(SPM) interferometry for displacement measurement.
针对正弦相位调制(SPM)干涉测量技术用于位移测量时,调制频率对干涉信号相位解调的影响,提出一种调制频率的优化选择依据。
2.
The relations between pyroelectric current and sensitive area as well as modulation frequency are analysed.
本文导出热释电列阵的热传递函数,明确地分析了热释电探测器灵敏元的面积,电流响应率及调制频率的关系。
3.
lt has a deep study on low-frequency modulation characteristics, which includes the modulation wave through high-speed photodetector, the relationship between modulation frequency and threshold current , and the relationship between average output power and modulation frequency.
给出了用高速光电探测器探测到的调制信号波形,并进一步分析了调制 频率与闭值电流之间的关系,以及调制频率与平均输出功率之间的关系。
5)  modulating frequency
调制频率
1.
The influencing regularities of the number of analytical cycles, thermal convection density and modulating frequency on the detecting results were analyzed by simulation.
仿真分析得到了分析周期数、热流密度和调制频率对检测结果的影响规律。
2.
The triple harmonic signal was simulated and the best modulating frequency was given.
从理论上推导了调频光外差谐波碘稳频的信号公式,模拟出三次谐波的信号线型,并讨论调制频率的合适选取。
6)  FM (frequency modulation)
调频,频率调制
补充资料:调频-调频遥测系统
      采用调频-调频二重调制方式的频分制遥测系统,简称FM-FM遥测系统,属于模拟式遥测系统。FM-FM遥测系统的抗干扰能力强,遥测精度也比较容易得到保证。模拟式遥测系统大都采用这一类系统。下图为 FM-FM遥测系统的框图。各路被测量经变换器变换成电压信号后去控制各路副载波振荡器。副载波振荡器一般采用压控振荡器(即电压控制的振荡器),其振荡频率正比于控制电压,这样就实现了第一次调频。为了防止路际干扰,各路已调副载波先通过低通滤波器,滤去高次谐波,再送到相加放大器形成多路信号,并通过信道调制器对载波调频,这样就实现了第二次调频。已调频的载波由发射天线发送出去。接收端收到遥测信号后先通过解调器解调出多路信号,再送往各分路的带通滤波器,即分路滤波器,把各路已调副载波分离开来。分离出来的已调副载波送到相应的分路解调器,进行第二次解调,就可以得到所传送的模拟信号。美国对 FM-FM遥测系统已经实现了标准化、模块化、系列化。广泛应用模拟集成电路制成标准部件,提高了系统的可靠性和适应性。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条