说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 贫油冷却器
1)  lean oil cooler
贫油冷却器
2)  oil cooler
油冷却器
1.
A study of heat transfer property of low-fin-tube oil cooler with helical baffle;
螺旋隔板低肋管机油冷却器的传热特性研究
2.
The comparable experimental investigation on the fouling characteristics of normal tube and twisted tubes in oil cooler was carried out.
对螺旋扁管与普通直管在油冷却器中的污垢特性进行了对比实验研究。
3.
By testing,the structure of main parts of the modular cooling device was determined,and its key part,a new oil cooler,was developed.
通过计算分析,提出了高速动力分散式电力动车组模块化冷却装置的总体方案;通过试验研究,确定了模块化冷却装置主要零部件的结构型式;成功研制出模块化冷却装置的关键部件——一种全新结构的油冷却器。
3)  oil-cooler
油冷却器
1.
For petal-shaped fin tube oil-cooler with helical baffle s, as the oil pressure drop in shell side is 90 kPa , the overall heat transfer coefficient of oil_cooler is 3200 W/(m2·K), which is 15% higher than that of low fin tube oil-cooler with helical baffles, and is 5 times as large as that of smooth tube oil-cooler with segmental baffles, so it is an efficient oil-cooler.
对于螺旋隔板花瓣管润滑油冷却器, 当壳程油侧压降为90 kPa时, 其总传热系数可达3200 W/(m2·K), 比螺旋隔板低肋管油冷却器高15%以上, 为普通弓形隔板光滑管油冷却器的5倍左右, 因而它是目前国内外传热效能最高的水冷壳管式油冷却器。
4)  oil cooler
机油冷却器
1.
The Automation Testing System of Engine Oil Cooler Heat Transfer Capability;
内燃机机油冷却器传热性能自动测试系统
2.
Research and Realization of Vehicle Oil Cooler s Fatigue Property Pulsation System Based on Fuzzy-PID Control;
基于模糊PID控制的机油冷却器疲劳性能脉冲试验系统的研制
3.
By this test and measure system,main components of engine cooling-and-lubricating system such as water pump assembly,oil pump assembly and oil cooler can be tested fully,as well as flow distribution and flow resistance characteristic of cooling-and-lubricating system can be tested,verified and researched statically.
该试验系统不仅可以对发动机冷却润滑系统的主要部件水泵、机油泵和机油冷却器等进行完整试验,还可以对冷却润滑系统的流量分配和流阻特性进行静态试验验证和研究,而且具有和发动机匹配连接的功能以及在发动机工作过程中对其冷却润滑系统性能进行试验研究和匹配的能力。
5)  oil radiator
机油冷却器
1.
Investigation of Heat Conduction and Flow-Resistance characteristics of An Oil Radiator for IVECO Automobile;
依维柯汽车机油冷却器传热及流阻性能的试验研究
2.
An automobile engine oil radiator s integrative test system(ORITS) has been developed and is introduced in this paper.
本文介绍了一种测试内燃机机油冷却器性能的综合试验系统。
6)  Oil cooler
滑油冷却器
1.
The development of the oil cooler for one type of diesel engine is presented.
介绍了某型柴油机配套滑油冷却器的改进设计,采用新型锯齿型内翅式传热管冷却器替代原扁管式滑油冷却器,性能试验证明:改进设计后的滑油冷却器的主要性能均优于前者,解决了原扁管式滑油冷却器使用寿命短,可靠性差的问题。
补充资料:XF系列沸腾干燥(冷却)器(卧式)


概述  
沸腾干燥,又称流化床,它是由空气过滤器、加热器、沸腾床主机,旋风分离器、布袋除尘器、高压离心风机、操作台组成,由于干燥物料的性质不同,配套除尘设备时,可按需要考虑,可同时选择旋风分离器,布袋除尘器,也可选择其中一种,一般来说比重较大的如冲剂及颗粒物料干燥只需选择旋风分离器,比重较轻的小颗粒状和粉状物料需配套布袋除尘器,并备有气力送料装置及皮带输送机供选择。
散料状固体物料由加入流化床干燥器中,过滤后的洁净空气加热后由鼓风机送入流化床底部经分布板与固体物料接触,形成流态化达到气固的热质交换。物料干燥后由排料口排出,废气由沸腾床顶部排出经旋风除尘器组和布袋除尘器回收固体粉料后排空。
蒸气、电、热风炉均可配用(按用户要求配套)。
它适用于散粒状物料的干燥,如:医药药品中的原料药、压片颗粒料、中药冲剂、化工原料中塑料树脂、柠檬酸和其它粉状、颗粒状物料的干燥除湿,还用于食品饮料冲剂、粮食加工、玉米胚芽、饲料等的干燥。物料的粒径一般为最大可达6mm,最佳在0.5-3mm。  
产品优点  
可实行自动化生产,是连续式干燥设备。干燥速度快、温度低、能保证产品质量、符合药品生产GMP要求。  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条