1) oxygen-denuded air
贫氧空气
2) Air-oxidation
空气氧化
1.
Leaching Kinetics of Zinc Sulfide Concentrate with Air-oxidation and Sulfuric Acid;
硫化锌精矿空气氧化硫酸浸出的动力学研究
2.
Controls on the Production Process of Copper Sulphate by Air-oxidation in Liquid Phase;
液相空气氧化生产硫酸铜过程的控制
3.
The air-oxidation products of terpinolene were analyzed by GC-MS,the major constituents identified were p-cymol,α,p-dimethyl styrene,p-cymene,dipentene,etc.
用气相色谱-质谱联用技术对异松油烯的空气氧化产物进行了分析,确定其主要产物为p-伞花醇、p,α-二甲基苯乙烯、对伞花烃、双戊烯等,并通过改变温度、溶剂等对氧化产物中各成分的含量变化进行了研究。
3) aerobic oxidation
空气氧化
1.
Optimization of aerobic oxidation of cyclohexane catalyzed by metalloporphyrins;
金属卟啉催化空气氧化环己烷反应的工艺优化
2.
The aerobic oxidation of p-xylene catalyzed by μ-oxo bis[tetra-para-chlorophenylporphinato]iron and cobalt acetate [(Tp-ClPPFe)2O/Co(OAc)2] without solvent and bromides was reported,and the co-catalysis between(Tp-ClPPFe)2O and Co(OAc)2 was proposed.
对二甲苯液相氧化是目前石油化工领域最重要的碳氢化合物氧化反应之一,本文报道了μ-氧双[四对氯苯基卟吩]合铁/醋酸钴[(Tp-ClPPFe)2O/Co(OAc)2]复合催化体系在无溶剂体系中催化空气氧化对二甲苯的反应,初步考察了(Tp-ClPPFe)2O/Co(OAc)2复合催化体系的催化过程,在单因素考察催化剂种类和使用量对反应转化率和产物选择性影响的基础上,使用正交实验全面考察了该反应中时间、温度、压力、空气流速、金属卟啉用量、醋酸钴/金属卟啉质量比对反应转化率和产物选择性的影响,获得了优化反应条件。
4) Air oxidation
空气氧化
1.
The air oxidation and atmospheric stripping methods were applied for treating sour water originally.
炼油厂酸性水来自常减压、催化裂化、焦化和油品加氢过程,含有硫化氢、氨、油、酚、氰、悬浮物等污染物,早期采用的处理方法大多为空气氧化法和常压汽提法,目前以单塔加压侧线抽出汽提工艺和双塔加压汽提工艺为主,但小水量、低浓度酸性水的处理正在向高效微生物技术、化学氧化脱硫-生物脱氮技术等个性化技术发展。
2.
A new advanced oxidation process combining micro-electrochemical oxidation and air oxidation was developed for treatment of the refractory dye intermediate effluents from the 2,2',5,5'-tetrachlorobenzidine(TCB) manufacturing processes.
利用微电解+空气氧化技术对2,2’,5,5’-四氯联苯胺生产车间排出的难降解有机废水处理进行了试验研究。
5) air blowing
空气氧化
1.
The modification mechanism was studied based on the system of air blowing modification of coal tar pitch.
针对釜式空气氧化改质系统,分析了烟气析出排放过程的内部机理,提出了煤沥青空气氧化过程中烟气挥发速率模型,通过积分法对模型进行变换,并用作图法检验模型。
2.
Thermal polymerization and air blowing were carried to pretreat coal pitch in this experiment,we can find that it has great influence of pretreatment on composition,structure and properties of precursor,even influence on specific surface area and pore structure of active carbon.
实验采用热聚合与空气氧化聚合两种工艺分别对沥青进行预处理 ,发现原料预处理工艺对所制备前驱体的组成、结构和性能影响很大 ,由此导致制备的活性炭比表面积与孔结构同样存在显著差异 。
6) Oxygen-rich air
富氧空气
1.
This paper takes one Chengdu float glass production line for example,discusses oxygen-rich air collection method of nitrogen station in float glass plant and its effect factors in collecting oxygen-rich air,and also puts forward some suggestions about nitrogen station oxygen-rich air system s design.
以成都某浮法玻璃生产线为例,探讨浮法玻璃工厂氮气站富氧空气收集方法及富氧空气收集利用过程中的影响因素,并对氮气站的富氧空气系统设计提出了几点建议。
补充资料:2-[2-[2-(2-苯氧乙氧基]乙氧基]乙氧基]乙醇
CAS:36366-93-5
分子式:C14H22O5
中文名称:2-[2-[2-(2-苯氧乙氧基]乙氧基]乙氧基]乙醇
英文名称:Ethanol,2-[2-[2-(2-phenoxyethoxy)ethoxy]ethoxy]
2-(2-(2-(2-phenoxyethoxy)ethoxy)ethoxy)-ethanol
tetraethylene glycol monophenyl ether
分子式:C14H22O5
中文名称:2-[2-[2-(2-苯氧乙氧基]乙氧基]乙氧基]乙醇
英文名称:Ethanol,2-[2-[2-(2-phenoxyethoxy)ethoxy]ethoxy]
2-(2-(2-(2-phenoxyethoxy)ethoxy)ethoxy)-ethanol
tetraethylene glycol monophenyl ether
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条