说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 模油
1)  moulding oil
模油
2)  reservoir simulation
油藏模拟
1.
In the past two decades, various reservoir upscaling theories and methods have been proposed for reservoir characterization and reservoir simulation.
近20年来,由于油藏描述与油藏模拟的需要,人们提出了许多油藏模型网格粗化(Reservoir Upscaling)的理论与方法。
2.
Aiming at the contradictions of high water cut stage oilfield, combine with fine reservoir geology, production seismology, petrophysical and geological modeling, production logging, well testing, reservoir simulation, economic evaluation and program design, the multi-disciplinary professional conduct multidisciplinary reservoir studies.
针对陆相高含水期油田开发中的矛盾,将精细油藏地质、开发地震、岩石物理、地质建模、生产测井、试井、油藏模拟、经济评价和方案设计等多学科、多专业结合起来进行多学科油藏研究。
3)  reservoir modeling
油藏建模
1.
Application of reservoir modeling in potential finding in developed reservoir:a case study in Hongxing area;
油藏建模技术在老区挖潜中的应用——以红星地区为例
4)  stimulant oil
模拟油
1.
The results show that adipates are quite easy to migrate from PVC thin films for food strapping to the stimulant oil.
采用气相色谱-质谱单离子监测技术,以已二酸二(1-丁基戊基)酯(BBPA)为内标,对PVC食品保鲜膜在模拟油脂介质中己二酸二乙酯、己二酸二异丁酯、己二酸二丁酯、己二酸二(2-丁氧基乙基)酯、已二酸二(乙基己基)酯等5种己二酸酯类增塑剂的迁移行为进行了研究。
2.
In this paper, the migration of DEHA in PVC film for food packaging dipped in stimulant oil, hormal hexane, was studied.
研究了PVC食品包装膜中的增塑剂DEHA在模拟油(正己烷)中的迁移行为,测定了影响迁移过程的速度常数和活化能,并探讨了它们与温度和DEHA初始浓度的关系。
5)  hydraulic cylinder for mould closing
闭模油缸
6)  black oil model
黑油模型
1.
Time-lapse seismic forward modeling based on black oil model;
基于黑油模型的时移地震正演模拟
2.
According to the parameters varying rules of Shengtuo oil field, the black oil model is improved, and the corresponding numerical simulation software is also programmed.
 油田在注水开发过程中,储层的物性参数、流体性质等都在不断发生变化,本文根据胜坨油田沙二1-2的储层参数随含水变化的基本规律,对黑油模型数值模拟软件进行了改进,使之能够考虑油藏储层参数的变化,并应用软件分析了参数变化对开发效果的影响。
3.
The paper developed a common numerical model on multiphase fluid flow by Darcy Law based on phase equilibrium and Mass Conservation Law, and then the black oil model and the multi?component model for CO 2 injection were developed.
在此基础上 ,又导出了常用的多组分数学模型、适于注CO2 的多组分数学模型和黑油模型。
补充资料:皂化溶解油、肥皂油和调水油
分子式:
CAS号:

性质:又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂(如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂)和少量稳定剂(如乙醇或甲醇)而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主,润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条