1) heating number
加热火次
2) reheating
[英][ri:'hi:t] [美][ri'hit]
二次加热
1.
Reheating Process for the Semi-solid A356 Alloy;
半固态A356合金的二次加热工艺研究
2.
Detection of the Reheating State of Semisolid Hypoeutectic Al-Si Alloy;
半固态亚共晶铝硅合金二次加热状态检测
3.
Effect of In-situ Al_2O_3 Particles on Reheating Microstructure of Near-liquidus Casting Al-Cu Alloy
原位Al_2O_3颗粒对近液相线铸造Al-Cu合金二次加热组织的影响
3) Reheat
[英][,ri:'hi:t] [美][ri'hit]
二次加热
1.
Relationship of Microstructure and Toughness Index of Reheated High Grade Pipeline Steels;
高钢级管线钢二次加热后韧性指标变化规律及其与组织关系探讨
2.
Study of reheated microstructures of semi-solid ingots of SiC_p/2024 composites;
SiC_p/2024复合材料半固态坯二次加热组织的研究
3.
Effect of reheating on toughness index and microstructure of high grade pipeline steels;
二次加热对高钢级管线钢韧性及其组织的影响
4) remelting
二次加热
1.
Using resistance furnace, the structure of A356 aluminum alloy casted by nearby liquidus semi-continuous was studied during remelting by means of electron microscope and image analysis apparatus.
利用电阻炉加热,采用电子显微镜及图象分析仪,研究了近液相线铸造A356铝合金在二次加热过程中的组织变化。
2.
The remelting temperature field of semi-solid A356 alloy was simulated using ANSYS software.
利用大型有限元分析软件,模拟计算了半固态A356铝合金的二次加热温度场·结果表明:在给定铝合金二次加热温度的前提下,线圈电流密度与加热时间成反比,与试样内、外温差大小成正比·当用总截面为40mm×130mm的宽线圈加热时,合适的线圈的电流密度为0 5×107A/m2和0 6×107A/m2,此时铝合金内外温差分别为8 6℃和9 8℃,加热时间分别为31min和21min;当用总截面为20mm×130mm的窄线圈加热时,合适的电流密度分别为0 8×107A/m2和0 85×107A/m2,此时铝合金内外温差分别为8 6℃和8 9℃,加热时间分别为33min和30min·本研究为A356合金半固态生产工业化提供理论指导
3.
The casting microstructures are gradually turned into equiaxed grains by remelting.
为了研究半固态金属的成型规律,采用电子显微镜及图像分析仪,研究了近液相线半连续铸造ZL201合金的微观组织及其在二次加热过程中的变化。
5) two-stage preheating
两次加热
1.
By optimizing structure parameters, two-stage preheating, increasing nozzles and using interleaving and densely covered installation method, the sinter feed preheating was meliorated.
该技术采用2台锅炉并联的方式稳定热源,通过优化结构参数、两次加热、增加喷嘴数量及采取错排密布的安装方式,改善了加热质量,并通过高效脱水,控制蒸汽对混合料水分的影响。
6) one heating
一次加热
1.
Sumitomo Metal Industries succeeded to develop Ultra Thick H-Beams of H400×400 series and H500×500 series from 250mm thickness slabs with one heating .
住友金属工业公司成功地开发了用一次加热250mm厚板坯轧制H400×400,H500×500系列超厚H型钢。
补充资料：加勒比次区
在itat中，加勒比次区包括巴哈马、百慕大、加勒比群岛、圭亚那、法属圭亚那、苏里南
（注意：南美次区和加勒比次区有一部分是重合的）
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条