1) squish velocity
挤流速度
2) extrusion speed
挤压速度
1.
The influence of extrusion speed and frictional status on Aluminum profile extrusion processes;
挤压速度和摩擦状态对铝型材挤压过程的影响
2.
Effects of extrusion speed and billets of electromagnetic casting on microstructure and mechanical properties of AZ31 magnesium alloy sheet
挤压速度和电磁铸造锭坯对AZ31镁合金板材组织和性能影响
3.
3mm,spiral angle was 30°,the experiment with six speed ,the relation of pitch and extrusion speed was researched in the paper.
3mm,螺旋角度为30°的双螺旋孔棒为研究对象,采用六种挤压速度研究了螺距与挤压速度的关系,结果表明螺距随挤压速度的增加而增加。
3) extrusion velocity
挤出速度
1.
Effect of extrusion velocity to wear degree of aluminum profile;
铝型材挤出速度对模具磨损程度的影响
4) extruding speed
挤压速度
1.
It is proved that the extruding speed in reverse extruding can be increased to 27.
对中强焊接结构材料7N01铝合金进行了高速反向挤压实验,研究了挤压方式、挤压温度、挤压速度对合金成型过程以及组织性能的影响。
2.
The simulation result shows that deformation of the whole sample is heterogeneous when the extruding speed or the friction coefficient becomes larger gradually.
模拟结果表明:随着挤压速度或摩擦的增大,试样整体变形越来越不均匀。
5) extrusion velocity
挤压速度
1.
Based on this, using DEFORM3D software, the tube forming processes at different extrusion velocity were simulated.
在此基础上,采用DEFORM3D软件,对不同挤压速度的成形过程进行了模拟,发现挤压速度为0。
2.
A series of simulation results of temperature field, stress field, strain field and strain rate field of the deforming material were obtained under different extrusion velocity.
通过二维建模软件建立管材立式挤压模型,采用DEFORM2D大型有限元数值模拟软件进行纯铜管热挤压过程的数值模拟,获得了不同挤压速度下变形材料内部的温度场、应力场、应变场及应变速率场的变化规律。
6) Wheel angular velocity
挤压轮速度
补充资料：血流速度
血流速度
血液在血管内流动的线速度，即一个质点在血流中前进的速度。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条