1) squeeze
挤 压
2) express,extrude,extrusion,extruding
挤出，挤压
3) extruding
挤压
1.
Technological research on extruding steering spiral bar;
转向螺杆的挤压成形工艺研究
2.
Experimental research on the diet fiber of rice bran by extruding;
挤压加工米糠膳食纤维的试验研究
3.
The experimental study on the influence regularity of extruding-expanding on crude fibre content of corn straw;
挤压膨化对玉米秸秆中粗纤维含量的影响
4) extrude
挤压
1.
To explore why the ratio of collectable wort extract is higher than that of non-extruded,the influences of all parameters of rice extrusion system(barrel temperature,material moisture,screw speed) on resistant starch content of extuded rice were studied by using second-order quadratic orthogonal rotating combination design method.
为探索挤压蒸煮大米啤酒辅料麦汁浸出物收得率高于传统不挤压蒸煮啤酒辅料收得率的原因,用二次正交旋转组合试验法设计安排试验,研究了大米挤压蒸煮系统诸参数(套筒温度、物料含水量、螺杆转速)对大米抗性淀粉含量的影响规律。
2.
The microstructure and mechanical properties of the extruded and rolled plates of spray co-deposited 7075/SiCp composites were tested and analyzed.
对喷射共沉积7075/SiCp复合材料坯经过挤压和轧制后的板材微观组织和力学性能进行了测试和分析。
3.
Then, the non-coarse-grain recrystallizational extruded LY 12 aluminum alloy bars can be manufactured.
通过大量生产实验获得了生产无粗晶环的ＬＹ１２合金挤压棒的工艺方案和最佳参数。
5) squeeze
挤压
1.
Application of Squeeze on Permanent Mould Casting of Mg-Alloys;
挤压在镁合金金属型铸造中的应用
2.
An investigation on extracting method of wheat straw pulp black liquor Extraction technique of squeeze and filtration - diffusion and displacement integrated;
麦草浆黑液提取方法的探讨 挤压过滤——扩散置换集成提取技术
3.
The proper squeeze which is a or repeated essential technological process before processing the attapulgite clay can make it dissolved and make it more viscid and colloidal.
适当的挤压作用,有利于凹凸棒石的水化和粘结性能、胶体性能的发挥,这是凹凸棒石粘土加工必须的一道或多道工艺过程。
6) extrusion
挤压
1.
Research on intelligent design system for extrusion process of thin-walled cylinder based on CBR/RBR integrated reasoning;
基于CBR/RBR集成推理的薄壁圆筒件挤压工艺智能设计系统的研究
2.
Saccharification Experiment for Extrusion Cooked Wheat Used as Beer Adjunct;
挤压蒸煮小麦作啤酒辅料的糖化试验
3.
Die container optimum design for aluminum alloy extrusion;
铝合金挤压模具型腔曲线优化设计
参考词条
补充资料：冲击波超压与动压
[解释]： 核爆炸产生的高温、高压火球膨胀，在周围介质中形成连续向外传播的压力脉冲（或冲击波），冲击波阵面传播到空间某点时，超过周围环境大器的压力称超压；空气粒子高速随波阵面运动产生的冲击压力称动压。超压和动压都以帕斯卡（Ｐａ）为主单位。超压随时间的变化取决于爆炸威力、距爆点的距离和爆心周围的介质情况。特定地点的峰值超压一般出现在冲击波阵面到达该点的瞬间，超压在该点的持续时间称为正压作用时间。尔后，该点的压力下降到低于周围压力，称为负压，再逐渐回升到周围压力值。对人员的直接冲击伤，超压为２０—２９千帕可引器轻度伤；２９—５９千帕可导致中度伤；５９—９８千帕可造成重度伤；大于９８千帕可造成极重度伤。动压为１０—２０千帕可造成中度伤；２０—３９千帕可造成重度伤；大于３９千帕可造成极重度伤。动压的推动、抛掷和超压的挤压会造成物体变形和毁坏。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。