2) flame spraying
火焰喷涂
1.
Experimental study of wear resistance of nickel based WC composite coating prepared by flame spraying and remelting+;
火焰喷涂重熔Ni基WC复合涂层的耐磨性能试验研究
2.
Influence of spraying distance of ceramic soft wire flame spraying on properties of layer;
陶瓷软线材火焰喷涂距离对涂层性能的影响
3.
On the properties of nylon 1010/nanometer TiO_2 coatings by flame spraying;
火焰喷涂尼龙1010/纳米TiO_2复合涂层力学性能研究
3) flame spray
火焰喷涂
1.
TiC-TiB_2 multiphase ceramic coatings prepared by reactive flame spray;
TiC-TiB_2复相陶瓷涂层的反应火焰喷涂制备
2.
Polyamide 1010(PA1010)/nano-ZrO2 composite coating was prepared by flame sprayed.
利用火焰喷涂法制备了尼龙1010(PA1010)/n-ZrO2复合涂层,采用差示扫描量热法(DSC)对复合涂层的非等温结晶过程、熔融行为进行了分析。
3.
Polyamide12(PA12) and PA12/nano-SiO_2 composite coatings were prepared by flame spray.
采用火焰喷涂法制备了聚酰胺12/纳米SiO2(PA12/nano-SiO2)复合涂层,利用差示扫描量热法(DSC)对复合涂层的非等温结晶过程、熔融行为进行了分析。
4) flame spray coating
火焰喷涂
1.
Flame spray coating endothermic ceramic coating and its wear-resistant behaviour;
吸热陶瓷涂层的火焰喷涂及其耐磨行为
2.
The paper introduces the principle ,apparatus and technology of Plastics powder using flame spray coating,coating materials as PP, EVA resin,nylon, polyphenyl thioether, chlorinated polyether and so on and their corrosion resistance.
介绍了塑料粉末火焰喷涂的原理、装置及工艺,聚乙烯、EVA树脂、尼龙、聚苯硫醚、氯化聚醚等涂层材料,以及这些涂层材料的耐腐蚀性能。
5) the flame thermal spray
火焰热喷涂
1.
The design and the flame thermal spray process of the piston;
一种柱塞件的设计与火焰热喷涂加工
6) SHS Flame Spray
SHS火焰喷涂
1.
Based on the CuO+Al system with the additives of additional aluminum and Al2O3+13%TiO2, the SHS Flame Spraying coatings were produced on the surface of the steel substrate.
选用CuO-Al体系,加入过量Al及(Al2O3+13%TiO2)添加剂原料,在钢基表面SHS火焰喷涂,对涂层进行了磨损性能测定及显微组织分析。
补充资料：火焰喷涂
分子式：
CAS号：
性质： 将金属粉末或塑料粉末用火焰喷枪喷涂到物体表面的涂布方法。聚乙烯、尼龙、氟树脂和环氧树脂广泛采用。其过程是粉末材料与适当的助溶剂混合后，用压缩空气或惰性气体将其从贮料槽中吹出，在锥形火焰中被加热到熔融温度，并喷到经过净化处理及预热过的工件上，直至达到所需厚度为止。适用于现场施工。
CAS号：
性质： 将金属粉末或塑料粉末用火焰喷枪喷涂到物体表面的涂布方法。聚乙烯、尼龙、氟树脂和环氧树脂广泛采用。其过程是粉末材料与适当的助溶剂混合后，用压缩空气或惰性气体将其从贮料槽中吹出，在锥形火焰中被加热到熔融温度，并喷到经过净化处理及预热过的工件上，直至达到所需厚度为止。适用于现场施工。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条