1) piston skirt;skirt
活塞裙<边>
2) Piston skirt
活塞裙部
1.
The approximation to the longitudinal-section contour of piston skirt based on BP neural network;
基于BP网络的活塞裙部纵向型线的拟合
2.
As a result of high fuel consumption of 2108 diesel engine,a goal to lower fuel consumption is obtained by improving the design of 108 piston skirt size and optimizing the clearance between the piston and the jacket.
针对2108柴油机机油耗高这一问题,通过改进设计108活塞裙部型线尺寸,优化活塞与缸套的配合间隙,以达到降低柴油机机油消耗率的目的。
3.
For the high-speed and high-performance modern engine,the piston skirt is a very important part in the piston design.
在现代高速、高性能发动机上,活塞裙部是活塞设计中特别重要的部位,裙部形状和表面粗糙度影响着动态油膜的形成与保持,直接影响到发动机机械效率和漏气量。
3) aluminum piston skirt
活塞铝裙
1.
The mechanical properties of aluminum piston skirt made of LD11 alloy were measured.
测试了LD11铝合金柴油机活塞铝裙的力学性能 ,利用光学显微镜、场发射扫描电镜及透射电镜分析了活塞铝裙的微观组织结构 ,得出活塞铝裙微观组成相并探讨了微观组织结构与性能间的关系。
2.
By ufilizing the optical microscope,the field emission scanning electron microscope and the transmission electron microscope,the microstructure of aluminum piston skirt of 240 diesel engine was analyzed.
利用光学显微镜、场发射扫描电镜及透射电镜 ,分析了 2 4 0柴油机活塞铝裙的微观组织结构 ,得出其组成相是 :Al合金基体 +Si相 +Mg2 Si,探讨了铝裙微观组织结构与延伸率的关系。
4) piston skirt
活塞裙
1.
Based on the different influences of these variables to the quality of products, the billet of the piston skirt was selected.
LD1 1铝合金活塞裙由于形状复杂、含硅量高 ,非常难以成形 。
2.
Testing and comparative analysis is conducted of 4032 aluminum manufactured both at home and abroad, and the results indicate that the advantage of Alcoa 4032 aluminum for piston skirt in terms of chemical composition, microstructure and performances is significant to the smooth operation of a piston.
根据对国内外4032活塞裙材料检测对比分析,指出了美铝4032活塞裙材料在成分、组织、性能等方面的优势对保证活塞安全运行的重要意义,提出了国内4032材料性能提高的改进建议。
3.
Load increased on piston,unreasonable design of piston pin boss,unevenly distributed positive stress on pin hole,stress on inside upper area of pin hole much higher than that on outside,the quality problem in machining and assembly are main reasons of fracture of steel-topped aluminium-skirted piston skirt.
活塞承受的负荷不断提升,活塞销座设计不合理,销孔正应力分布不均匀,销孔内侧上方区域应力远高于外侧应力以及加工和装配中存在的质量问题是柴油机钢顶铝裙组合活塞裙部裂损的主要原因。
5) aluminum piston skirt
铝活塞裙
1.
In this paper, simulations of isothermal forming of aluminum piston skirt are performed with rigid-plastic FEM.
本文通过运用刚塑性有限元法 ,针对铝活塞裙等温成形过程进行了模拟分析 ,得出了其等效应变和应力的分布 ,论述了其变形工艺特点。
补充资料：白汁裙边
Image:11765177955322392.jpg
白汁裙边
原料：
水发裙边150克。 鸡翅膀100克、猪肋骨50克、猪肥瘦肉片50克。精盐3克，味精2克、葱姜12克、奶油25克。绍酒20克、姜汁15克、猪油35克、湿淀粉15克。
做法：
将水发裙边投入开水锅内，除去异味，用清水洗净，再用清水氽过，凉后切成长6厘米、宽2厘米的长方块备用。炒锅内放入熟猪油用中火烧热，放葱姜丝，煸出香味后，将鸡翅、猪肉片、猪肋骨放入锅内中略煸炒一下，随即加入奶汤、绍酒、精盐，捞出葱姜，开沸后，打去浮沫，将肋骨捞出排在砂锅底，上面放裙边，再将砂锅内的鸡翅随汤一并倒入砂锅内，用微火扒至裙边糯烂时，捞出裙边码入碗中，扣入汤盆内。锅内放入奶油、绍酒、精盐、姜汁及原汤，待沸后撇去浮沫，用湿淀粉勾芡。加入味精、淋葱油，浇在裙边上即成
特色：
裙边透明糯烂，汁浓洁白似胶，香气四溢,并有滋阴凉血之功效。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。