1) epoxy post
环氧树脂支柱
2) Hyperbranched epoxy resin
超支化环氧树脂
1.
Preparation of novel aliphatic hyperbranched epoxy resin and its modifying effect for epoxy resin;
新型脂肪族超支化环氧树脂的制备及其改性作用
2.
Preparation of low-viscosity and high molecular weight hyperbranched epoxy resin and their performance;
低黏度高分子质量超支化环氧树脂的合成及性能
3.
Molecular simulation of hyperbranched epoxy resins and performance of their hybrid resin;
超支化环氧树脂的分子模拟及其杂化树脂的性能
3) epoxide resin
环氧树脂
1.
Organic-inorganic hybrid composites were prepared by the sol-gel method for the wear-resistant coating on epoxide resin and TEOS,KH-560,KH-570 were used as starting materials.
以正硅酸乙脂、KH-560、KH-570为先驱体,采用溶胶-凝胶法结合旋转涂敷法在环氧树脂基体上制备了有机硅耐磨涂层。
2.
A new woodceramics was fabricated from wood powder and epoxide resin.
以香杉木粉和环氧树脂为原料制备了木材陶瓷,利用TGA对木粉、环氧树脂的热分解过程进行了研究,通过扫描电镜、X射线衍射技术对木材陶瓷的微观结构和物相进行表征,研究了碳化温度对木材陶瓷得碳率、体积收缩率、耐磨性的影响。
3.
The aqueous polyurethane modified by epoxide resin(WPUE) was prepared with trimethylolpropane(TMP) as cross linker, then epoxide-acrylate-polyurethane(WPUEA) hybrid dispersions were synthesized by free-radical emulsion polymerization which were carried out by using azodiisobutyronitrile (AIBN) as initiator and methyl methacrylate (MMA) as monomer.
以三羟甲基丙烷(TMP)为交联剂,先用环氧树脂改性聚氨酯(PU),得到环氧树脂改性的水性聚氨酯(WPUE)分散体,然后加入甲基丙烯酸甲酯(MMA)和引发剂偶氮二异丁腈(AIBN),通过自由基乳液聚合得到聚氨酯-环氧树脂-丙烯酸酯(WPUEA)杂合分散体,并通过傅里叶红外光谱、凝胶渗透色谱、粒径分析仪和透射电镜对其进行了表征。
4) epoxy
[英][ɪ'pɔksi] [美][ɪ'pɑksɪ]
环氧树脂
1.
Study on the curing process of benzoxazine-epoxy copolymerization;
苯并口恶嗪/环氧树脂共聚固化过程研究
2.
Effect of Nano-SiO_2 on Properties of PP/Epoxy Blends;
纳米SiO_2对聚丙烯/环氧树脂共混物性能的影响
3.
Synthesis and Low Surface Energy Property of New Polyblends of Amino(polysiloxane)-polyurethane-epoxy and PTFE;
聚四氟乙烯、有机硅复合改性聚氨酯/环氧树脂共混聚合物的合成及其低表面能特性
5) epoxy resins
环氧树脂
1.
Intrinsically fire retardant phosphorus-based epoxy resins;
含磷本质阻燃环氧树脂的研究进展
2.
Research advances in epoxy resins modified by inorganic nano-particles;
无机纳米粒子填充改性环氧树脂研究进展
3.
The developments in investigating waterborne curing agents for epoxy resins;
水性环氧树脂固化剂研究进展
6) epoxide
[英][e'pɔksaid] [美][ɛ'pɑksaɪd]
环氧树脂
1.
In this dissertation, we studied various ratio of reaction system of epoxide/ cyanate/Co caprilate.
本文研究了不同配比的环氧树脂/氰酸酯/异辛酸钴固化反应体系的性能。
补充资料：二氧化双环戊二烯环氧树脂
分子式：
CAS号：
性质：又称R型环氧树脂。双环戊二烯的二氧化物。白色结晶粉末，分子量164.2，相对密度1.330，熔融温度≥185℃，环氧当量82。易溶于乙酸、醇、醚、酮、苯、四氯化碳等。固化物马丁耐热200℃以上，耐候性及电性能好，硬度高，有自熄性。缺点是冲击性能欠佳。由双环戊二烯与过醋酸反应而得。可铸塑、模塑和层合。主要用作耐热、耐候铸塑料、模塑料、玻璃钢、胶黏剂和涂料。
CAS号：
性质：又称R型环氧树脂。双环戊二烯的二氧化物。白色结晶粉末，分子量164.2，相对密度1.330，熔融温度≥185℃，环氧当量82。易溶于乙酸、醇、醚、酮、苯、四氯化碳等。固化物马丁耐热200℃以上，耐候性及电性能好，硬度高，有自熄性。缺点是冲击性能欠佳。由双环戊二烯与过醋酸反应而得。可铸塑、模塑和层合。主要用作耐热、耐候铸塑料、模塑料、玻璃钢、胶黏剂和涂料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条