1) filler rodquality grade of filling wire
焊条质量
2) homogeneous electrode
同质焊条
1.
By the procedure of spraying the Ni-matrix alloy transition layer on the surface of casting defect and using multi-alloying cast iron homogeneous electrode with high welding current and continuous welding technique, obtained the homogeneous welding zone in which there is no chill structure and crack.
通过在铸件缺陷表面喷敷镍基合金过渡层 ,采用多元微合金化铸铁同质焊条大电流连续焊工艺 ,可获得无白口和裂纹的铸铁同质焊补区。
2.
The effects of Al element and welding temperature on the structure of welding zone obtained by Ca Ni Ti Bi multi alloying cast iron homogeneous electrode for arc cold welding were studied under producing condition.
在生产条件下 ,研究了铝粉的加入量及焊接温度对多元微合金化铸铁电弧冷焊同质焊条所获得的焊补区组织和性能的影响 ,观察评估了焊条的焊接工艺性能。
3) use quantity of covered electrode
焊条用量
1.
The appropriate welding grooves of pipes with high temperature and high pressure were evaluated from economical and technical aspects,and the formula was achieved to calculate the use quantity of covered electrode for different welding grooves of different pipes.
从经济和技术角度分析火电厂高温高压管道焊缝宜采用的坡口形式,并对各种坡口形式的焊条用量估算推导出经验公式。
4) welding quality
焊接质量
1.
Discussion the auxiliary examination of welding quality;
微机辅助检测焊接质量方法的探讨
2.
Influence of head motion on welding quality in titanium alloy linear friction welding;
钛合金线性摩擦焊机头跳动对焊接质量的影响
3.
The control of welding quality of the boiler and the pressure container;
锅炉、压力容器焊接质量控制
5) spot welding quality
点焊质量
1.
For the requirement of spot welding quality in automobile industry,a fuzzy evaluation system for spot welding quality was developed and the software was designed.
针对汽车行业对点焊的质量要求,制定了一种点焊质量模糊评判方案,并进行了软件设计。
6) Solder Joint Quality
焊点质量
1.
Inspection Method on Solder Joint Quality in SMT;
SMT焊点质量检测方法
2.
Study on ANN-based Expert-system Applied to SMT Solder Joint Quality Control;
基于神经网络的SMT焊点质量专家控制系统研究
3.
According to the characteristics that SMT solder joint quality is related to its 3-D geometrical shape directly, theory of solder joint shape was put forward.
根据SMT焊点质量与焊点的三维几何形态直接相关的特点 ,提出了SMT焊点形态理论。
补充资料：蚕茧质量监督检查和国家生丝质量检验
蚕茧质量监督检查和国家生丝质量检验
cocoon quality supervision inspection and national silk quality inspection
检验局承担并组织有关检验机构对全国已核发生产准产证的缘丝、绢纺企业的生丝、绢丝质量进行抽查检验(两年共四期)，以考核生产企业生丝质量水平。中国桑蚕鲜茧评茧计价方法主要有3种:①鲜上光茧干壳量仪器评定(简称仪评)计价;②“组合售茧、嫌丝计价，’(简称“组、缎”)评茧方法;③茧层率评茧计价。国家质量技术监督局于19望)年6月7日下发了《关于加强茧丝质t监督工作的通知》，要求加强桑蚕鲜茧收购期间的质量监督执法检查;重点做好鲜茧收购过程中“四率”(仪器配备率、仪器完好率、仪评率和仪评相符率)的检查工作。各级专业纤维检验机构应充分发挥职能作用，加强蚕茧质量监督管理;加强对茧站仪评计价工作指导;加强对蚕茧收购计t器具的检定工作;充分运用法律手段，在蚕茧收购期间开展执法检查活动，对违法行为坚决予以查处。 在国家生丝质t检验方面，1998年国家经贸委等4部门联合发布了(缀丝绢纺准产证制度实施办法》，规定缎丝、绢纺企业准产的基本条件。经国家茧丝绸协调小组审议，并报国务院领导批准，“国家生丝质量检验”项目列人(国家茧丝绷发展风险基金》第二批发展项目。该项目由中国纤维检验局承担并组织依法设t或依法授权的具有生丝、绢丝检验能力的纤检局(所)、生丝质检站对全国已核发生产准产证的缀丝、绢丝企业的生丝、绢丝质量进行检验。(吕善模)，ngconjian zhilia叩Jiondu iianCha he gUOJia she叩51 zh1旧nyan蚕茧质一监督检查和国家生丝质t检验coon甲ality su伴币sion inspection and natsilk卿ality ins衅tion)专业纤维检验机构蚕鲜茧收购期间，对茧站收购鲜茧进行质量监督和检验的全过程。国家生丝质量检验是指由中国CO-nal桑查维
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条