1)  azeotropic copolymer,azeotropic copolymerization
共沸共聚物
2)  azeotropic
共沸
1.
The homogeneous batch distillation and hetegeneous azeotropic batch distillation were studied for separating dimethylbenzene and butylacetate from the industrial waste solvents in this article.
研究了以均相间歇精馏和非均相共沸间歇精馏从工业废溶剂油中分离二甲苯和醋酸丁酯。
3)  co-boiling
共沸
1.
Reaction temperature is determined by co-boiling point while using organic solvent.
2;使用有机溶剂时,反应温度与共沸点有关。
2.
It's quite difficult to purify the substance co-boiling with water.
与水共沸的物质的精制相当困难,一般工艺流程都较长。
4)  azeotrope
共沸
1.
A computer-aided molecular design(CAMD)method based on genetic algorithm was proposed to design extractant molecule for extractive distillation of 1-butanol-butyl acetate azeotrope system.
基于遗传算法思想提出了一种有效的分子设计方法,针对丁醇-醋酸丁酯共沸物系的萃取精馏萃取剂选择问题进行了分子设计,经比较筛选出塔顶产物分别是醋酸丁酯和丁醇时的较佳萃取剂为1,3-丙二醇和硝基丁烷。
2.
Objective:Improve aleotropic crystallizing condition of penicilling and increase sylvite yield Method Azeotrope tower is added to W type bottom,Improved vacuum—degree and adjusted agitating rolling figure.
目的:改进青霉素共沸结晶条件、提高钾盐收率。
3.
The variation of binary azeotropes with pressure were studied.
OkPa压力下的加压共沸点。
5)  azeotropism
共沸
1.
Improving the rate of return on sodium salt azeotropism crystallization by means of improving equipment;
改进设备提高青霉素钠盐共沸结晶收率
2.
The azeotropism-fractionation process for recovering formic acid from acid wastewater in cyclohexanol/ cyclohexanone production was studied,and the feasible kind and dosage of entrainment reagent for was determined.
采用共沸—分馏组合法从环己醇和环己酮生产装置产生的酸性废水中回收甲酸,确定了适宜挟带剂的种类及加入量。
6)  Azeotropy
共沸
1.
Thinking about Azeotropy of the Turpentine Oil and Alcohol;
松节油与乙醇的共沸问题及思考
参考词条
补充资料：苯乙烯-丙烯腈共聚物/聚碳酸酯共混物
分子式：
CAS号：

性质：系由丙烯腈-苯乙烯共聚物与聚碳酸酯组成的共混物，可改善丙烯腈-苯乙烯共聚物的拉伸强度、热变形温度及冲击强度，并有较好的加工性能，耐溶剂性及耐候性，丙烯腈含量为25%的共聚物与聚碳酸酯共混可获得最好的综合性能，丙烯腈含量小于10%的共聚物与聚碳酸酯共混可得到透明材料，透光率可保持90%以上，机械共混法制取，可用于汽车仪表盘、挡泥板、其他外饰件及商用机器、电器制件等。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。