1)  exhaust gas recicrulation valve
废气再循环阀
2)  exhaust pressure modulated ,exhasut gas recirculation valve
排气压力控制废气再循环阀
3)  vacuum and spring operated exhaust gas recirculation valve
真空-弹簧控制型废气再循环阀
4)  waste gas
废气
1.
Hydrogen purification and recovery from waste gas in preparation of glyphosate by iminodiacetic acid;
IDA工艺路线草甘膦生产废气中H_2的回收提纯与利用
2.
The practice of PET technology waste gas treatment with catalytic combstion method;
催化燃烧法处理聚酯工艺废气的实践
3.
Treatment of waste gas containing NO_x with wet method;
碱性高锰酸钾溶液湿法脱硝氮氧化物废气的实践
5)  waste gases
废气
1.
This paper introduces the ammonia analysis methods with ammonia gas-sensitive electrode in WTW pH/Ion 340ic tester for determination of ammonia in waste gases of pollution resources as well as the problems in the in the analysis process should be noted.
本文介绍用氨气敏电极法在WTWpH/Ion340i测试仪上测定污染源废气中氨的分析方法,以及在分析过程中应注意的问题。
2.
Introduces a simple and effective method that is used to treat waste gases from manufacturing regenerated rubber, especially for medium and small-sized enterprises.
报导了一种简便、可行、效果好的处理生产再生胶所产生废气的方法,特别适合中小企业。
6)  exhaust gas
废气
1.
Study on the regeneration of the waste residue and the exhaust gas process of zisu polysaccharide;
紫苏糖废渣再生与废气处理的研究现状
2.
Control mechanism of exhaust gas recirculation(EGR) systemand trouble cases;
汽车废气再循环(EGR)系统的控制原理与故障实例
3.
Directing at the data distortion caused by the fault of sensors,and considering the factors influencing the measurement of certain exhaust gas in an animal barn such as temporal,spatial and environmental parameters,neural network is introduced to data fusion so as to figure out the missed data due to the faults of this sensor measuring the value of this exhaust gas.
针对因传感器故障而失真的数据,综合考虑对畜禽场排放的某一废气测量值的时间、空间和环境等多种影响因素,使用基于神经网络的数据融合方法来估算该废气的浓度,实现失真数据的恢复,从而精确地测量出养殖场连续排放的有害气体的总量,对超标排放进行监控。
参考词条
补充资料:溢流阀、顺序阀、减压阀的比较
溢流阀
减压阀
顺序阀
控制油路的特点
通过调整弹簧的压力控制进油路的压力,保证进口压力恒定,p2=0
通过调整弹簧的压力控制出油口的压力,保证出口压力p2稳定
直控式-通过调定调压弹簧的压力控制进油路压力;夜控式-由单独油路控制压力
出油口情况
出油口与油箱相连
出油口与减压回路相连
出油口与工作回路相连
泄漏形式
内泄式
外泄式
内泄式
进油口状态及压力值
常态
常闭(原始状态)
常开(原始状态)
常闭(原始状态)
工作状态
进出油口相通,进油口压力为调整压力
进油口压力低于出油口压力,出油口压力稳定在调定值上
进出油口相通,进油口压力允许继续升高
联接方式
并联
串联
实现顺序动作式串联作卸荷阀用时并联
功用
定压、溢流或安全作用限压、稳压、保压
减压、稳压
不控制系统的压力,只利用系统的压力变化控制油路的通断
进油腔压力p1控制阀芯移动
出油腔压力p2控制阀芯移动
进油腔压力p1控制阀芯移动
说明:补充资料仅用于学习参考,请勿用于其它任何用途。