1) solvent-proof pre-coat
防溶剂预涂层
2) solvent--based coating
溶剂型涂层
3) precoating brazing flux
预涂层钎剂
4) precoating flux layer
预涂钎剂层
5) solvent-borne antirust coatings
溶剂型防锈涂料
1.
This paper introduces the preparation of water-borne anti-rust coatings, using iron oxide red as anti-rust extender pigment, zinc phosphate and zinc oxide as anti-rust pigments, lepidolite as flake pigment and styrene/acrylic latex as binder; analyzes the factors influencing the performances and compares the performances with solvent-borne antirust coatings.
对影响其性能的因素进行了分析,并与溶剂型防锈涂料进行了性能对比。
6) water-souble precoat flux
水溶性预涂焊剂
补充资料：预涂层真空过滤机
产品名称 | 型号 | 主要技术参数 | 外型尺寸 （长×宽×高）mm | 地基尺寸 | 地脚螺栓 | ||||||
过滤面积(m2) | 转鼓直径(m) | 浸入角（o） | 转鼓转速(r/min) | 电机总功率(kw) | A | B | C | ||||
JGS转鼓 真空过滤机 | G2/1 | 2 | 1 | 120 | 0.13-2 | 1.1 | 1790×1550×1250 | 780 | 1080 | 1200 | M30 |
G2/1-X | 2 | 1 | 120 | 0.13-2 | 1.1 | 1790×1550×1250 | 780 | 1080 | 1200 | M30 | |
G5/1.75-X | 5 | 1.75 | 120 | 0.13-2 | 1.5 | 2500×2260×2460 | 1060 | 1420 | 1950 | M30 | |
G5/1.75 | 5 | 1.75 | 120 | 0.13-2 | 1.5 | 2500×2260×2460 | 1060 | 1420 | 1950 | M30 | |
JGF预涂层 转鼓真空 过滤机 | GF10/1.6-N | 10 | 1.6 | 140 | 0.3-3 | 1.5+0.37 | 3380×2690×2170 | 2480 | 2830 | 1680 | M24 |
GF20/2.2-N | 20 | 2.2 | 140 | 0.3-3 | 1.5+0.37 | 4460×3480×2930 | 3510 | 3860 | 2380 | M24 | |
GF30/2.7-N | 30 | 2.7 | 90-140 | 0.3-3 | 2.2+0.37 | 5100×4300×3850 | 4100 | 445 | 3000 | M24 | |
GF40/2.7-N | 40 | 2.7 | 90-140 | 0.3-3 | 3+0.37 | 7100×4300×3850 | 6100 | 6450 | 3000 | M24 | |
GF50/2.7-N | 50 | 2.7 | 90-140 | 0.3-3 | 3+0.37 | 7400×4250×3850 | |||||
JGD折带 (可利刀) 卸料转鼓 真空过滤机 | GD10/1.6-N | 10 | 1.6 | 140 | 0.13-0.79 | 2.2+0.37 | 3380×3700×2170 | ||||
GD20/2.6-N | 20 | 2.6 | 90-133 | 0.13-0.79 | 3+0.37 | 4960×4100×3310 | |||||
GD30/2.7-N | 30 | 2.7 | 90-133 | 0.13-0.79 | 3+0.37 | 5100×5800×3850 | |||||
GD40/3.0-N | 40 | 3.0 | 90-133 | 0.13-0.79 | 3+0.37 | 6570×4500×3410 | |||||
GD45/3.0-N | 45 | 3.0 | 90-133 | 0.1-0.7 | 3+0.37 | 6630×4500×3410 | |||||
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条