2) zonal structure
带状组织
1.
In this paper,the mechanism of formation of zonal structures in low-carbon alloy steel and three methods for removing them are introduced.
介绍了低碳合金钢中带状组织形成机理及三种主要的消除或减轻的方法。
2.
The results revealed that the non homogeneous distribution of the carbide caused the “zonal structure” appeared in the joint of drill rod which is hardened and hightemperature tempered.
结果表明，碳化物分布不均匀导致调质处理后在钻杆接头中产生“带状组织”。
3) banded structure
带状组织
1.
Effect of Banded Structure in Low Carbon High Sulphur Free Cutting Steel on Crack Formation of Cold Drawn Products;
低碳高硫易切削钢带状组织对冷拔材裂纹形成的影响
2.
Formation and elimination of banded structure of 20CrNi2Mo steel;
20CrNi2Mo钢带状组织的形成与消除
3.
The effect of finishing rolling temperature on banded structure of 16Mn steel plate;
终轧温度对16Mn钢板带状组织的影响
4) band structure
带状组织
1.
Effects of band structure on SSCC and CO 2 corrosion;
带状组织对SSCC和CO2腐蚀的影响
2.
This article focused on the effect of microstructure,especially the band structure to HIC-resistance of pipeline in H2S containing solutions with special attentions on the initiation and expansion of cracks.
结果表明:组织均匀的珠光体/铁素体型X65管线钢和铁素体/针状铁素体型X70管线钢均具有良好的抗H2S腐蚀性能;带状组织是裂纹萌生和扩展的主要途径;合金元素的弥散析出作用可以提高管线钢的抗硫化氢腐蚀性能。
3.
The tested results show that, the band structure of G20CrMi2MoA steel is eliminated by current impulse method in short time, and the grain size is refined at the same time.
结果表明,在较短时间内脉冲电流处理后的G20CrNi2MoA钢可以消除带状组织,细化晶粒。
5) banding microstructure
带状组织
1.
For isothermal treated plates at 600℃ for 20min after rolling process, the banding microstructure of theplates containing 0.
21％Al在冷速为10℃/s范围内明显抑制奥氏体向先共析铁素体的转变,提高了贝氏体的淬透性;对于780℃终轧后在600℃等温20min的钢板,Al通过提高碳的活度减轻或避免了带状组织的形成,明显提高了轧制钢板的力学性能。
2.
Experimentally, both the evolutions of interfacial morphology, and the typically solidified features, such as competitive growth of the two phases, coupled growth and banding microstructure were observed, which provide the clue for the further control of the mi.
在理论上预测了可能存在的相和组织形态,并通过实验得到了包晶合金定向凝固过程中界面形态的演化,两相竞争生长,两相共生生长和带状组织等凝固现象,为进一步控制TiAl合金的定向凝固组织奠定了基础。
6) banded microstructure
带状组织
1.
Influence of banded microstructure on hydrogen-induced cracking (HIC) resistance of pipeline steel;
带状组织对管线钢抗氢诱发开裂(HIC)性能的影响
2.
Industrial trials have shown that banded microstructure, caused by high concentration of carbon and manganese, and higher copper content contribute the formation of cold bending cracks, which could be solved by rightly controlling chemical compositions of the steel and processing parameters.
研究表明:碳、锰含量高的钢中容易形成带状组织,钢中较高的铜含量和带状组织是形成冷弯裂纹的重要原因;生产厚规格带钢时,薄板坯表面微裂纹在轧制过程中难以消除;通过对化学成分和生产工艺的合理控制可以显著提高带钢的冷弯合格率。
3.
Mechanics and main reasons of the banded microstructure in hot rolled heavy plate were analyzed.
分析了热轧中厚板生产过程中带状组织的形成机理和主要原因,讨论了连铸过程中枝晶偏析控制,以及热轧过程中加热、控制轧制和控制冷却等对带状组织的影响,并提出了预防和减轻带状组织的工艺控制措施。
补充资料：1450ram热轧宽带钢精轧机组(攀枝花钢铁公司)
1450ram热轧宽带钢精轧机组(攀枝花钢铁公司)
枝_:轧宽带钢精轧机组(攀哪
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条