1) oil-catalyst slurry
催化剂油浆
2) FCC slurry
催化油浆
1.
Effect of blending FCC slurry to the delayed coking production;
掺炼催化油浆对延迟焦化装置生产的影响
2.
In order to make full use of FCC slurry,SINOPEC Jinan Company conducted an experiment to test the feasibility of blending the slurry into feedstock of a delayed coking unit.
为解决催化油浆的出路问题,济南分公司在延迟焦化装置进行了掺炼催化油浆的试验,催化油浆在焦化原料中以不同的掺炼比例进行了试验。
3.
The FCC slurry from Qilu Petro-Chem and Shengli vacuum residue(VR)were mixed in different proportions.
将齐鲁石化胜利炼油厂北催化油浆(FCC)和胜利减压渣油(VR)以不同比例搀兑,在490℃、0。
3) Decant oil
催化油浆
1.
The properties of the mixed residuum were carefully investigated with the aid of modern analytical apparatus,when catalytical cracking decant oil was mixed with vacuum residuum;and some mathematical models of properties were built up.
借助一些现代分析手段对不同掺兑比下的南阳减压渣油和催化油浆的组成和性质进行分析 ,并对其变化规律进行了数学回归 。
2.
Zhongyuan vacuum residue and catalytic cracking decant oil propane deasphalting was carried out at the pilot continuous solvent deasphalting equipment.
以中原某炼油厂减压渣油和催化油浆为原料 ,结合溶剂脱沥青工艺的特点 ,以丙烷为溶剂对掺兑油浆后的减压渣油进行丙烷脱沥青研究 。
4) FCC slurry oil
催化油浆
1.
Several deasphalted oil samples were obtained from vacuum residuum and FCC slurry oil deasphalted at continuous propane deasaphalting pilot equipment.
研究发现,减压渣油和掺兑催化油浆的减压渣油的丙烷脱沥青油具有较好的产物分布和选择性;而催化油浆的脱沥青油的裂化性能较差。
2.
Battery sealing agent 20, which complies with Standard SH0421-92, can be manufactured based on the following process: adding a proper amount of FCC slurry oil to the deep-oxidized vacuum residue, then micro-oxidize the mixture.
首先对减压渣油进行深度氧化后加入合适比例的催化油浆 ,再进行微氧化生产出符合 SH 0 4 2 1 -1 992电池封口剂标准要求的 2 0号电池封口剂产品 ,从而提高了 2 0号电池封口剂生产对原料的适应
3.
The effects of different additives, such as thermal conversion products, carbon powder and NH4MoPO4, on the phase separation of Daqing FCC slurry oil were investigated.
选取大庆催化油浆为原料 ,利用热台显微镜对油浆相分离行为进行了考察。
5) Slurry Catalyst
浆状催化剂
1.
The Study on the Preparation Technology of Slurry Catalyst for Synthesis of DME;
合成二甲醚浆状催化剂的制备条件研究
2.
This work suggests a novel method of preparing slurry catalysts .
利用完全液相法制备了CuO/ZrO2浆状催化剂,通过X射线衍射、氮气吸附和程序升温还原等方法对催化剂的结构和织构性质进行了研究,并考察了CuO/ZrO2催化剂上CO加氢反应的性能。
6) serous catalyst
浆液催化剂
1.
Study on ethylene polymerization with serous catalyst;
TH-1L高效气相法浆液催化剂催化乙烯聚合
2.
TH-1 serous catalyst and M-1 solid catalyst were used to produce DFDA7042 in pilot polyethylene plant.
在中试聚乙烯装置上分别应用TH-1L浆液催化剂和固体M-1催化剂通过聚合反应,生产DFDA7042产品,对产品进行性能对比,以评价两种催化剂的性能。
补充资料：催化剂-油比率
分子式：
CAS号：
性质：又称剂油比。石油催化裂化工艺中的一个控制参数，表示催化剂循环量与总进料量之比。剂油比大，原料油能与更多催化剂接触，单位催化剂上的积炭少，催化剂失活程度小，从而使转化率提高，但剂油比增大会使焦炭产率增加。剂油比太小，会增加热裂化反应的比例，使产品质量变差。
CAS号：
性质：又称剂油比。石油催化裂化工艺中的一个控制参数，表示催化剂循环量与总进料量之比。剂油比大，原料油能与更多催化剂接触，单位催化剂上的积炭少，催化剂失活程度小，从而使转化率提高，但剂油比增大会使焦炭产率增加。剂油比太小，会增加热裂化反应的比例，使产品质量变差。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条